PulsarHydraulics12thEdition

SPILL PLUG KITS

Pulsar Spill Plugs were designed for use during repair and maintenance of hydraulic systems. With an easy-to-grip top, these durable plugs require no tools for installation or removal and only require hand tightening to be installed. They can be pushed into any open port or hose up to 1 1 ⁄ 2 ” I.D. to contain fluid and prevent spillage while keeping out dirt and debris during servicing. Plugs are silicone-free and have good resistance to most oils and chemicals allowing them to be used in a wide variety of industrial applications ranging from auto and marine repair to home and industrial plumbing. Their high-visibility colour ensures no plug gets left behind. Each spill plug kit comes complete with four small plugs, four medium plugs, and two large plugs. It is important to note that these plugs are not to be used

under pressure. Always clean plugs before reusing. Temperature Range : -25°C (-13°F) to 90°C (194°F).

HKIT-SP... ASSORTED HYDRAULIC SPILL PLUG KIT Qty Description Fits Hose I.D. 4 Small Service Plug 3 ⁄ 16 " to 1 ⁄ 2 " 4 Medium Service Plug 5 ⁄ 16 " to 1" 2 Large Service Plug 1 ⁄ 2 " to 1 1 ⁄ 2 "

HKIT-SPS... SMALL HYDRAULIC SPILL PLUG KIT

INSTALLATION INSTRUCTIONS:

20

Small Service Plug

3 ⁄ 64 " to 1 ⁄ 2 "

HKIT-SPM... MEDIUM HYDRAULIC SPILL PLUG KIT

INSERT

10

Medium Service Plug 5 ⁄ 16 " to 1"

HKIT-SPL... LARGE HYDRAULIC SPILL PLUG KIT

Accessories

PUSH

4

Large Service Plug

1 ⁄ 2 " to 1 1 ⁄ 2 "

TWIST CLOCKWISE

186