PulsarHydraulics12thEdition

CUSHION CLAMPS

Cushion clamps allow hose or tube to be routed in single line runs, multiple line runs of the same diameter, or multiple line runs of various diameters. Runs can be stacked to conserve space and make installations more rigid. This steel clamping system allows for a definitive reference when measuring line runs as the center distance (vertically and horizontally) remains the same regardless of changes in hose or tube size.

HC… CUSHION CLAMPING UNIT WITH OUTSIDE MOUNTING HOLES

Mounting

Part No.

Clamp Size Clamp Holes Length

Holes

HC-10-1-2 1 1 ⁄ 2 " HC-10-2-3 1 1 ⁄ 2 " HC-10-3-4 1 1 ⁄ 2 " HC-10-4-5 1 1 ⁄ 2 " HC-10-5-6 1 1 ⁄ 2 " HC-16-1-2 2" HC-16-2-3 2" HC-16-3-4 2" HC-16-4-5 2" HC-32-1-2 3" HC-32-2-3 3" HC-32-3-4 3" HC-32-4-5 3" HC-46-1-2 5" HC-46-2-3 5" HC-72-1-2 6 1 ⁄ 2 "

1 2 3 4 5 1 2 3 4 1 2 3 4 1 2 1

2.188" 3.797" 5.297" 6.797" 8.297" 2.656" 4.766" 6.797" 8.797" 4.000" 6.859" 9.859" 12.859" 6.000" 11.000"

2 3 4 5 6 2 3 4 5 2 3 4 5 2 3 2

7.500"

SG… SPLIT BUSHING FOR HOSE Hose O.D. SG10-06 1 1 ⁄ 2 " 0.359" SG10-04P 1 1 ⁄ 2 " 0.516" SG10-09 1 1 ⁄ 2 " 0.562" SG10-11 1 1 ⁄ 2 " 0.656" SG10-12 1 1 ⁄ 2 " 0.734" SG16-04 2" 0.234" SG16-06 2" 0.359" SG16-07 2" 0.400" SG16-08 2" 0.484" SG16-04P 2" 0.516" SG16-09 2" 0.562" SG16-10 2" 0.609" SG16-06P 2" 0.656" SG16-12 2" 0.734" SG16-08P 2" 0.813" SG16-14 2" 0.859" SG16-15 2" 0.922" SG16-16 2" 0.984" SG16-12P 2" 1.031" G32-17 3" 1.125" G32-19 3" 1.200" G32-23 3" 1.406" G32-25 3" 1.453" G32-26 3" 1.560" G32-27 3" 1.703" G32-29 3" 1.750" G32-31 3" 1.906" G46-25 5" 1.453" G46-27 5" 1.703" G46-31 5" 1.785" G46-32 5" 2.000" G46-33 5" 2.040" G46-34 5" 2.169" G46-40 5" 2.500" G46-43 5" 2.688"

CLAMP SELECTION CHART

Hose or Tube Size 3 ⁄ 16 " to 3 ⁄ 4 " O.D.

Clamp Series

HC-10 HC-16 HC-32 HC-46 HC-72

1 ⁄ 4 " to 1" O.D. 3 ⁄ 8 " to 2" O.D. 1" to 2 1 ⁄ 2 " I.D. 2" to 4" I.D.

Mounting Guidelines: Cushion clamps can be mounted using a thread adapter to a tapped hole or with the use of a lock washer and nut. We also offer weld adapters for weld mounting for attaching directly to a surface. Use the clamp spacing chart below to determine placement of clamps.

RECOMMENDED CLAMP SPACING

Clamp Hole Size

Support Spacing

0.23"– 0.50" 0.51 – 0.86 0.87 – 1.25 1.25 – 1.50 1.51 – 2.25

3.3 ft 4.0 ft 5.0 ft 6.5 ft 8.8 ft

Accessories

HC… CUT-TO-SIZE CUSHION CLAMPING UNIT

Part No.

Clamp Size Clamp Holes Length

HC-10-32 1 1 ⁄ 2 " HC-16-24 2" HC-32-16 3"

32 24 16

48" 48" 48"

183

pulsarhydraulics.com