MarineHose&Fittings
Animated publication
TABLE OF CONTENTS
MARINE FUEL HOSE
Fuel Hose ..................................................3 Heater Hose ............................................... 4 Exhaust & Coolant Hose ............................... 4-5 Silicone Hose ............................................. 5-6 Sanitation Hose .......................................... 6 Bilge & Vent Hose ......................................7 Water Hose ................................................ 8 Suction Hose .............................................. 9 Discharge & Washdown Hose Assemblies ......... 10 Specialty Hose............................................ 11 Stainless Steel Pipe Fittings .........................12 Galvanized Steel Pipe Fittings ....................... 12 Cast Brass Pipe Fittings................................ 13 Strainers .................................................... 13 Hose Shanks & Combination Nipples ..............13 Aluminum Cam-Locks................................... 14 Stainless Steel Cam-Locks ............................14 Brass Cam-Locks ......................................... 15 Polypropylene Cam-Locks .............................15 Stainless Steel Valves .................................. 16 PVC Valves ................................................. 16 Brass Valves ............................................... 17 Nozzles & Couplings .................................... 18 Stainless Steel Bolt Clamps........................... 19 Stainless Steel Gear Clamps .......................... 20 Pinch Clamps.............................................. 21 Support Clamps...........................................21 Fish Fittings............................................... 22 Sealant & Anti-Corrosion .............................. 23 Lubrication ................................................ 23 Pressure Gauges.......................................... 23 Cleanup ..................................................... 23 Cable Ties .................................................. 23
Speci cations for fuel hose used aboard small craft have been standardized by the Marine Technical Committee of the SAE (Society of Automotive Engi neers) under their speci cation J1527. Hose can be broken down into four broad groups (A1, A2, B1, & B2) according to two requirements; fuel permeabil ity and ame resistance. Fuel Permeability : Class 1 hose has the greatest resistance to fuel vapours permeating through the hose itself. Therefore, in enclosed engine compart ments where fuel is constantly in the hose, Class 1 hose should always be used. Class 2 hose exhibit less resistance to permeation, and so are intended for ller or vent hose where fuel does not usually lie in the hose, or where there is no threat of fumes collecting in an enclosed area. Flame Resistance : Type A hose has a ame re sistant cover and will resist burning. Type B hose has not been subjected to any ammability tests. Typically, fuel feed lines will be type A1, combining maximum resistance to permeation and to re. Vent and ller neck hose will be A2 or B2.
In addition to our industrial hose and ttings products, Green Line is a master distributor for Pulsar Hydraulics . We carry large inventories to support our distributors and hose assembly specialists that keep industries like this moving. With a wide variety of products including High Abrasion Resistant hydraulic hose, crimp couplings, hydraulic adapters, and quick couplings, you can be sure that Green Line has you covered for all your hydraulic needs.
Can't Find What You're Looking For? Visit www.greenlinehose.com for more information or contact us directly at any one of our locations across Canada. Our friendly staff look forward to helping you with all of your hose and ttings needs!
2
FUEL HOSE
Working Standard Pressure Length
Working Standard Pressure Length
I.D.
Part No.
O.D.
I.D.
Part No.
O.D.
G681A… TYPE A2 HARDWALL MARINE FUEL FILL
G682A… TYPE A2 SOFTWALL MARINE FUEL FILL
G681A Type A2 Fuel Fill meets the fire resistance test required in SAE J1527 and features a wire helix that allows the hose to be used
With the same features as G681A but without the helix wire reinforcement, G682A is particularly useful in short lengths for joining filler necks to tanks where space is tight. Temperature Range : -40°C (-40°F) to 80°C (176°F). 1 1 ⁄ 4 " G682A-125 1.67" 60 psi
around obstacles and in tight bends without kinking. Temperature Range : -40°C (-40°F) to 80°C (176°F). 1 ⁄ 2 " G681A-050 0.91" 60 psi
10 or 50 ft 10 or 50 10 or 50 10 or 50 10 or 50
5 ⁄ 8 3 ⁄ 4 7 ⁄ 8
G681A-063 0.98 G681A-075 1.14 G681A-088 1.26 G681A-100 1.38 G681A-113 1.50 G681A-125 1.65 G681A-131 1.65 G681A-138 1.77 G681A-150 1.89 G681A-163 2.05 G681A-175 2.17 G681A-188 2.28 G681A-200 2.40 G681A-213 2.53 G681A-225 2.68 G681A-238 2.76 G681A-250 2.89
60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60
10 or 50 ft 10 or 50 10 or 50 10 or 50 10 or 50
1 1 ⁄ 2 1 5 ⁄ 8 1 3 ⁄ 4 1 7 ⁄ 8
G682A-150 1.91 G682A-163 2.07 G682A-175 2.19 G682A-188 2.30 G682A-200 2.42 G682A-225 2.74 G682A-238 2.81
60 60 60 60 60 60 60
1
1 1 ⁄ 8 1 1 ⁄ 4 1 5 ⁄ 16 1 3 ⁄ 8 1 1 ⁄ 2
10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50
2
10 or 50 10 or 50 10 or 50
2 1 ⁄ 4 2 3 ⁄ 8
1 5 ⁄ 8 1 3 ⁄ 4 1 7 ⁄ 8 2 1 ⁄ 8 2 1 ⁄ 4 2 3 ⁄ 8 2 1 ⁄ 2 2
G611A… TYPE A1 FUEL FEED HOSE
G681CE... CE APPROVED HARDWALL MARINE FUEL FILL
G611A is specially formulated to meet the strict requirements set out by SAE J1527 Type A1-15 Marine Hose and is required for where fuel is constantly sitting in the hose in an enclosed engine compartment. Temperature Range : -20°C (-4°F) to 95°C (203°F). 1 ⁄ 4 " G611A-025 0.54" 100 psi 50 or 250 ft 5 ⁄ 16 G611A-031 0.61 100 50 or 250 3 ⁄ 8 G611A-038 0.68 100 50 or 250 1 ⁄ 2 G611A-050 0.82 100 50 or 250 5 ⁄ 8 G611A-063 1.00 75 50 or 250
Similar to our G681A Type A2 Hardwall Marine Fuel Fill hose, G681CE is ideal for customers exporting small craft to Europe who might require the higher standard CE approved fuel fill hoses. Temperature Range : -40°C (-40°F) to 80°C (176°F). 1 1 ⁄ 2 " G681CE-150 1.97" 150 psi 10 or 50 ft
2
G681CE-200 2.48 G681CE-238 2.90
150 150
10 or 50 10 or 50
2 3 ⁄ 8
3
HEATER HOSE
EXHAUST & COOLANT HOSE Working Standard I.D. Part No. O.D. Pressure Length G381… HARDWALL MARINE COOLANT & EXHAUST
Working Standard Pressure Length
I.D.
Part No.
O.D.
G301… HEATER HOSE
Recommended for wet exhaust service on marine engines, G381 meets SAE J2006 Type R2 specifications and is also designed to handle water intake and general radiator applications. Temperature Range : -40°C (-40°F) to 100°C (212°F). 1 ⁄ 2 " G381-050 0.89" 60 psi
10 or 50 ft 10 or 50 10 or 50 10 or 50 10 or 50
With an excellent temperature range, superior weathering resistance, and economic price point, G301 is a popular choice for water engine lines, bilge hose, and shower drains. Temperature Range : -40°C (-40°F) to 100°C (212°F). 1 ⁄ 2 " G301-050 0.81" 50 psi 50 or 700 ft 5 ⁄ 8 G301-063 0.88 35 50 or 700 3 ⁄ 4 G301-075 1.03 31 50 or 700
5 ⁄ 8 3 ⁄ 4 7 ⁄ 8
G381-063 1.00 G381-075 1.12 G381-088 1.24 G381-100 1.35 G381-113 1.47 G381-125 1.63 G381-131 1.67 G381-138 1.75 G381-150 1.87 G381-163 2.03 G381-175 2.15 G381-188 2.26 G381-200 2.40 G381-213 2.56 G381-225 2.68 G381-238 2.76 G381-250 2.91 G381-263 3.23 G381-275 3.31 G381-288 3.43 G381-300 3.54 G381-313 3.70 G381-350 4.09 G381-400 4.65 G381-413 4.76 G381-450 5.12 G381-500 5.67
60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60
1
1 1 ⁄ 8 1 1 ⁄ 4 1 5 ⁄ 16 1 3 ⁄ 8 1 1 ⁄ 2
10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50
1 5 ⁄ 8 1 3 ⁄ 4 1 7 ⁄ 8 2 1 ⁄ 8 2 1 ⁄ 4 2 3 ⁄ 8 2 1 ⁄ 2 2 5 ⁄ 8 2 3 ⁄ 4 2 7 ⁄ 8 3 1 ⁄ 8 3 1 ⁄ 2 2 3
G302... THERMAL HEATER
G302 Thermal Heater is designed to handle high heat and ozone conditions found in engines. It meets or exceeds SAE J20R3 D2 performance requirements. Temperature Range : -40°C (-40°F) to 121°C (250°F). 3 ⁄ 8 " G302-038 0.67" 50 psi 700 ft 1 ⁄ 2 G302-050 0.81 50 50 or 250 5 ⁄ 8 G302-063 0.94 50 50 or 250 3 ⁄ 4 G302-075 1.06 50 50 or 250
4
4 1 ⁄ 8 4 1 ⁄ 2
5
G381C... CORRUGATED MARINE COOLANT & EXHAUST
G304… HEAVY-DUTY HEATER
G381C meets SAE J2006 Type R2 specifications for marine exhaust hose but requires less force to bend and offers a tighter bend radius for those hard-to-reach areas. Temperature Range : -40°C (-40°F) to 100°C (212°F). 1 1 ⁄ 2 " G381C-150 1.89" 60 psi 10 or 50 ft 1 5 ⁄ 8 G381C-163 2.05 60 10 or 50 1 3 ⁄ 4 G381C-175 2.17 60 10 or 50 1 7 ⁄ 8 G381C-188 2.30 60 10 or 50 2 G381C-200 2.40 60 10 or 50 2 1 ⁄ 4 G381C-225 2.68 60 10 or 50 2 3 ⁄ 8 G381C-238 2.76 60 10 or 50 2 1 ⁄ 2 G381C-250 2.91 60 10 or 50 3 G381C-300 3.41 60 10 or 50 4 G381C-400 4.49 60 10 or 50 5 G381C-500 5.53 60 10 or 50 6 G381C-600 6.65 45 10 or 50
G304 Heavy-Duty Heater is designed for coolant circulation on large engines and provides excellent resistance to heat aging, anti-freeze solutions, and weathering. Temperature Range : -40°C (-40°F) to 165°C (329°F). 5 ⁄ 8 " G304-063 1.06" 150 psi 400 ft 3 ⁄ 4 G304-075 1.18 150 400 1 G304-100 1.38 150 400
4
EXHAUST & COOLANT HOSE
SILICONE HOSE
Working Standard Pressure Length
Working Standard Pressure Length
I.D.
Part No.
O.D.
I.D.
Part No.
O.D.
G388… SOFTWALL MARINE COOLANT & EXHAUST
G382... SILICONE HEATER
Used for straight connections in engine cooling and wet exhaust applications, G388 is particularly useful where installation space is limited. G388 meets SAE J2006 Type R1 specifications. Temperature Range : -40°C (-40°F) to 100°C (212°F). 3 ⁄ 4 " G388-075 1.10" 60 psi 10 or 50 ft
Designed for low pressure water and normal heater applications, G382 meets or exceeds SAE 20R3 Class A specifications. Silicone re mains flexible despite prolonged exposure to extreme temperatures, ozone, and oil. Temperature Range : -55°C (-67°F) to 175°C (347°F). 1 ⁄ 4 " G382-025 0.53" 60 psi 50 or 250 ft 3 ⁄ 8 G382-038 0.69 60 50 or 250 1 ⁄ 2 G382-050 0.81 50 50 or 250 5 ⁄ 8 G382-063 0.94 50 50 or 250 3 ⁄ 4 G382-075 1.06 40 50 or 250 1 G382-100 1.34 30 50 or 100
7 ⁄ 8
G388-088 1.26 G388-100 1.38 G388-113 1.50 G388-125 1.69 G388-131 1.73 G388-138 1.81 G388-150 1.93 G388-163 2.13 G388-175 2.20 G388-188 2.32 G388-200 2.50 G388-213 2.62 G388-225 2.76 G388-238 2.91 G388-250 3.05 G388-263 3.23 G388-275 3.31 G388-288 3.43 G388-300 3.54 G388-313 3.70 G388-325 3.79 G388-350 4.09 G388-400 4.57 G388-413 4.69 G388-450 5.12 G388-500 5.63 G388-550 6.14 G388-600 6.69 G388-663 7.50
60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60
10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50 10 or 50
1
1 1 ⁄ 8 1 1 ⁄ 4
1 5 ⁄ 16 1 3 ⁄ 8 1 1 ⁄ 2 1 5 ⁄ 8 1 3 ⁄ 4
1 7 ⁄ 8
G384… SILICONE COOLANT
2
2 1 ⁄ 8 2 1 ⁄ 4 2 3 ⁄ 8 2 1 ⁄ 2 2 5 ⁄ 8 2 3 ⁄ 4 2 7 ⁄ 8 3 1 ⁄ 8 3 1 ⁄ 4 3 1 ⁄ 2 4 1 ⁄ 8 4 1 ⁄ 2 3 4
Designed for heavy-duty heater and coolant applications, G384 meets or exceeds SAE 20R1 Class A specifications. Silicone remains flexible despite prolonged exposure to extreme temperatures, ozone, and oil. Temperature Range : -55°C (-67°F) to 175°C (347°F). 3 ⁄ 4 " G384-075 1.08" 85 psi 4 ft 7 ⁄ 8 G384-088 1.21 75 4 1 G384-100 1.33 75 4 1 1 ⁄ 8 G384-113 1.46 75 4 1 1 ⁄ 4 G384-125 1.58 70 4 1 3 ⁄ 8 G384-138 1.71 70 4 1 1 ⁄ 2 G384-150 1.83 65 4 1 5 ⁄ 8 G384-163 1.95 55 4 1 3 ⁄ 4 G384-175 2.08 50 4 1 7 ⁄ 8 G384-188 2.21 50 4 2 G384-200 2.33 50 4 2 1 ⁄ 8 G384-213 2.46 45 4 2 1 ⁄ 4 G384-225 2.58 45 4 2 3 ⁄ 8 G384-238 2.71 40 4 2 1 ⁄ 2 G384-250 2.83 40 4 2 5 ⁄ 8 G384-263 2.95 35 4 2 3 ⁄ 4 G384-275 3.08 35 4 2 7 ⁄ 8 G384-288 3.21 25 4 3 G384-300 3.33 25 4 3 1 ⁄ 4 G384-325 3.58 20 4 3 1 ⁄ 2 G384-350 3.83 20 4 3 3 ⁄ 4 G384-375 4.08 20 4 4 G384-400 4.33 20 4 4 1 ⁄ 2 G384-450 4.83 15 4 5 G384-500 5.33 15 4
5
5 1 ⁄ 2
6
6 5 ⁄ 8
5
SILICONE HOSE
SANITATION HOSE
Working Standard Pressure Length
Part
Working Weight
I.D.
Part No.
O.D.
I.D. Pressure Each G3846… SILICONE 45° ELBOW CONNECTOR Number O.D.
G380… RUBBER SANITATION HOSE
Our rubber sanitation hoses resist odour permeation and toilet chemicals and are suitable for all head and holding tank connections. For maximum permeation resistant, G380's butyl tube is the best choice. Temperature Range : -40°C (-40°F) to 100°C (212°F). White tube & cover 3 ⁄ 4 " G380-075 1.06" 60 psi 10 or 50 ft 1 G380-100 1.30 60 10 or 50 1 1 ⁄ 2 G380-150 1.89 60 10 or 50 Black tube & cover 3 ⁄ 4 " G380B-075 1.12 60 10 or 50 1 G380B-100 1.28 60 10 or 50 1 1 ⁄ 2 G380B-150 1.81 60 10 or 50
These useful elbows have 6" arms that can be cut to length to fit a variety of applications. Temperature Range : -55°C (-67°F) to 175°C (347°F).
1 ⁄ 2 " G3846-050 0.69" 150 psi
0.25 lb
5 ⁄ 8 3 ⁄ 4
G3846-063 0.80 150 G3846-075 0.94 150 G3846-100 1.19 150 G3846-150 1.69 125 G3846-200 2.19 80 G3846-225 2.44 75 G3846-250 2.69 60 G3846-275 2.94 60 G3846-300 3.19 60 G3846-350 3.89 50 G3846-400 4.39 45
0.27 0.30 0.43 0.57 0.65 0.75 0.96 1.01 1.12 1.28 1.65
1
1 1 ⁄ 2
G941M… PVC SANITATION HOSE
2
2 1 ⁄ 4 2 1 ⁄ 2 2 3 ⁄ 4
3
3 1 ⁄ 2
4
With a smooth, heavy wall and good odour resistance, G941M is perfect for sanitation applications but can also be used for potable water refill lines, livewell circulation, and heavy-duty bilge applications. Temperature Range : -20°C (-4°F) to 65°C (150°F). 5 ⁄ 8 " G941M-063 0.88" 100 psi 50 or 100 ft 3 ⁄ 4 G941M-075 1.00 100 50 or 100 1 G941M-100 1.25 90 50 or 100 1 1 ⁄ 8 G941M-113 1.38 80 50 or 100 1 1 ⁄ 4 G941M-125 1.50 80 50 or 100 1 1 ⁄ 2 G941M-150 1.75 80 50 or 100 2 G941M-200 2.38 50 50 or 100 G941MH… CORRUGATED PVC SANITATION HOSE
G3896… SILICONE 90° ELBOW CONNECTOR
Designed for maximum flexibility to make installation easy, G941MH is designed for sanitation lines on marine toilets but can also be used for bilge pumping, dockside pump out, or sink drain lines. Temperature Range : -20°C (-4°F) to 65°C (150°F). 1" G941MH-100 1.22" 45 psi 100 ft 1 1 ⁄ 4 G941MH-125 1.50 40 100 1 1 ⁄ 2 G941MH-150 1.80 40 100 Hose Cuff Size Diameter Part No. Weight G91… VINYL SCREW CUFF
1 ⁄ 2 " G3896-050 0.69" 150 psi
0.25 lb
5 ⁄ 8 3 ⁄ 4
G3896-063 0.80 150 G3896-075 0.94 150 G3896-100 1.19 150 G3896-125 1.63 93 G3896-150 1.69 125 G3896-200 2.19 80 G3896-225 2.44 75 G3896-250 2.69 60 G3896-275 2.94 60 G3896-300 3.19 60 G3896-350 3.69 50 G3896-400 4.19 45
0.27 0.29 0.41 0.51 0.60 0.64 0.75 0.80 0.95 0.99 1.19 1.60
1
1 1 ⁄ 4 1 1 ⁄ 2 2 1 ⁄ 4 2 1 ⁄ 2 2 3 ⁄ 4 2
3
3 1 ⁄ 2
Vinyl Screw Cuffs are threaded to fit over G941MH hose, providing a tight seal and full internal flow. 1 1 ⁄ 2 " 1 1 ⁄ 2 " G91-150-150 0.15 lb
4
6
BILGE & VENT HOSE
Standard
Standard Length
I.D.
Part No.
O.D.
Cuff Length Length
I.D.
Part No.
Wall Thickness
G930… CORRUGATED BILGE HOSE
AV… AIR VENT & BLOWER DUCTING
Our most economical bilge pump hose, G930 comes in a range of sizes that will fit most popular pumps while the smooth cuff sections every foot allow for easy clamping. Temperature Range : -40°C (-40°F) to 195°C (203°F). 5 ⁄ 8 " G930-063 0.82"
AV is a lightweight vinyl ducting supported by a steel wire for use in venting bilge fumes. It is also suitable for bathroom fan and general-purpose air exhaust. Temperature Range : -20°C (-4°F) to 65°C (150°F). 3" AV-300 3.50 mm 50 ft 4 AV-400 3.50 50
0.93" 1.22 1.22 1.20 1.18
50 ft box
3 ⁄ 4
G930-075 0.97 G930-113 1.39 G930-125 1.47 G930-150 1.91
50 50 50 50
1 1 ⁄ 8 1 1 ⁄ 4 1 1 ⁄ 2
Working Standard Pressure Length
I.D.
Part No.
O.D.
G941WB… HEAVY DUTY BILGE
Heavy-Duty Bilge hose is designed for applications where high flexibility is required in a durable hose. Made from FDA approved materials, G941WB can also be used for potable water fill lines. Temperature Range : -20°C (-4°F) to 65°C (150°F). 3 ⁄ 4 " G941WB-075 1.00" 50 psi 50 or 100 ft 1 1 ⁄ 8 G941WB-113 1.25 35 50 or 100 1 1 ⁄ 4 G941WB-125 1.50 50 50 or 100 1 1 ⁄ 2 G941WB-150 1.75 50 50 or 100
G946… REINFORCED BILGE & VACUUM HOSE
With excellent resistance to constant flexing while still being lightweight, G946 is popular as a superior bilge pump and vent hose since it resists cracking and will conform to tight bends without collapsing. Temperature Range : -30°C (-22°F) to 65°C (150°F). 1 1 ⁄ 4 " G946-125 1.40” 45 psi 50 ft 1 1 ⁄ 2 G946-150 1.67 36 50 1 3 ⁄ 4 G946-175 1.92 35 50 2 G946-200 2.17 26 50 2 1 ⁄ 4 G946-225 2.42 23 50 2 1 ⁄ 2 G946-250 2.67 20 50 3 G946-300 3.18 20 25 3 1 ⁄ 2 G946-350 3.69 16 25 4 G946-400 4.20 14 25
7
WATER HOSE
Working Pressure Standard at 20°C Length
Working Pressure Standard at 20°C Length
I.D.
Part No.
O.D.
I.D.
Part No.
O.D.
G900… CLEAR VINYL TUBING
G912… REINFORCED VINYL
G912 is designed for hot and cold pressurized water lines. The opaque white tube reduces algae growth and when coupled with garden hose fittings, it is commonly used for dockside water refilling. Temperature Range : -5°C (23°F) to 65°C (149°F). 1 ⁄ 2 " G912-050 0.69" 150 psi 50 or 300 ft 5 ⁄ 8 G912-063 0.85 125 50 or 200 3 ⁄ 4 G912-075 0.99 100 50 or 200
Soft, easy to handle, and crystal clear to allow full view of the materials being conveyed, G900 is economical for use on drains and bait box recirculating lines but is also suitable for potable water use. Temperature Range : -5°C (23°F) to 70°C (158°F). 1 ⁄ 8 " G900-013-025 1 ⁄ 4 " 65 psi 100 ft 3 ⁄ 16 G900-019-025 1 ⁄ 4 50 100 3 ⁄ 16 G900-019-031 5 ⁄ 16 55 100 3 ⁄ 16 G900-019-038 3 ⁄ 8 60 100 1 ⁄ 4 G900-025-038 3 ⁄ 8 55 100 5 ⁄ 16 G900-031-044 7 ⁄ 16 50 100 3 ⁄ 8 G900-038-050 1 ⁄ 2 45 100 3 ⁄ 8 G900-038-056 9 ⁄ 16 50 100 3 ⁄ 8 G900-038-063 5 ⁄ 8 55 100 7 ⁄ 16 G900-044-056 9 ⁄ 16 38 100 1 ⁄ 2 G900-050-063 5 ⁄ 8 30 100 1 ⁄ 2 G900-050-069 11 ⁄ 16 40 100 1 ⁄ 2 G900-050-075 3 ⁄ 4 45 100 5 ⁄ 8 G900-063-088 7 ⁄ 8 40 100 3 ⁄ 4 G900-075-100 1 35 100 7 ⁄ 8 G900-088-113 1 1 ⁄ 8 30 100 1 G900-100-125 1 1 ⁄ 4 25 100 1 1 ⁄ 4 G900-125-150 1 1 ⁄ 2 20 50 1 1 ⁄ 2 G900-150-188 1 7 ⁄ 8 30 50 2 G900-200-250 2 1 ⁄ 2 35 50
I.D. Length Part No.
Weight Each
G912… REINFORCED VINYL ASSEMBLIES 1 ⁄ 2 " 25 ft G912-050GHT25 3.0 lb 50 G912-050GHT50 5.7 5 ⁄ 8 25 G912-063GHT25 3.5 50 G912-063GHT50 6.7
Working Pressure Approx at 20°C Reel Length
I.D.
Part No.
O.D.
G1033... PREMIUM WATER
G911… VINYLITE® POTABLE WATER HOSE
With a very soft and supple feel, Premium Water coils and uncoils easily and completely. This potable water hose is made of FDA, phthalate-free materials and will remain flexible even in the coldest weather. Temperature Range : -40°C (-40°F) to 65°C (149°F). 1 ⁄ 2 " G1033-050 0.78" 150 psi 500 ft 5 ⁄ 8 G1033-063 0.94 150 500
Extra reinforcement, heavier construction, and higher working pressures than standard marine potable water lines make G911 popular for a variety of marine applications. Temperature Range : -5°C (23°F) to 65°C (149°F). 1 ⁄ 8 " G911-013 0.33" 350 psi 300 ft 3 ⁄ 16 G911-019 0.38 250 300 1 ⁄ 4 G911-025 0.44 250 100 or 300 5 ⁄ 16 G911-031 0.53 250 300 3 ⁄ 8 G911-038 0.59 225 100 or 300 1 ⁄ 2 G911-050 0.75 200 100 or 300 5 ⁄ 8 G911-063 0.89 200 200 3 ⁄ 4 G911-075 1.03 150 100 or 200 1 G911-100 1.30 125 100 or 200 1 1 ⁄ 4 G911-125 1.62 100 100 1 1 ⁄ 2 G911-150 1.94 100 100 2 G911-200 2.49 75 100
Weight
I.D. Length Part No. Each G1033... PREMIUM WATER ASSEMBLIES 1 ⁄ 2 " 25 ft G1033-050GHT25 4.5 lb 50 G1033-050GHT50 8.0 75 G1033-050GHT75 12.0 100 G1033-050GHT100 16.0 5 ⁄ 8 25 G1033-063GHT25 4.9 50 G1033-063GHT50 11.1 75 G1033-063GHT75 16.3 100 G1033-063GHT100 22.0
8
SUCTION HOSE
Working Standard Pressure Length
Working Standard Pressure Length
I.D. Part No.
O.D.
I.D.
Part No.
O.D.
G942W… FABRIC REINFORCED TRANSFER
G941K… PVC SUCTION
Originally developed as a general-purpose suction hose, G941K is flexible, lightweight, and non-marking, making it ideal for marine ap plications such as deck washdown, bilge pumping, and scupper drains. Temperature Range : -20°C (-4°F) to 55°C (130°F). 3 ⁄ 4 " G941K-075 0.94" 110 psi 100 ft 1 G941K-100 1.26 85 100 1 1 ⁄ 4 G941K-125 1.51 85 100 1 1 ⁄ 2 G941K-150 1.76 70 100 2 G941K-200 2.32 65 100 2 1 ⁄ 2 G941K-250 2.87 65 100 3 G941K-300 3.41 65 100 4 G941K-400 4.55 55 100 6 G941K-600 6.75 40 100
By incorporating a polyester fabric braid into the construction of the hose, G942W can be used for applications requiring greater working pressures and increased flexibility compared to suction hoses reinforced with a spiral helix only without sacrificing visual confirmation of mate rial flow. G942W features a right-hand, clockwise helix. Temperature Range : -20°C (-4°F) to 65°C (150°F). 6" G942W-600 7.17" 70 psi Multiples of 20 ft
8 G942W-800
9.34
60 40 28
Multiples of 20 ft Multiples of 20 ft Multiples of 20 ft
10 G942W-1000 11.63 12 G942W-1200 13.80
G943W… LOW-TEMP FABRIC REINFORCED TRANSFER
G941BW... BLUE WATER SUCTION
Our Low-Temp Fabric Reinforced Transfer is manufactured to stay flex ible at sub-zero temperatures. Rated to -40°C (-40°F) with a distinct blue helix for easy identification, G943W can be relied upon year round for heavy-duty suction and discharge unlike other PVC suction hoses that become too stiff. G943W features a right-hand, clockwise helix. Temperature Range: -40°C (-40°F) to 60°C (140°F). 10" G943W-1000 11.63" 40 psi Multiples of 20 ft
Designed to stay flexible at sub zero temperatures and resistant to degradation in oily conditions, Blue Water can be used in a variety of marine applications including deck washdown, bilge pumping, and scupper drains. Temperature Range : -40°C (-40°F) to 65°C (150°F). 3 ⁄ 4 " G941BW-075 0.94" 115 psi 100 ft 1 G941BW-100 1.26 90 100 1 1 ⁄ 4 G941BW-125 1.51 90 100 1 1 ⁄ 2 G941BW-150 1.79 90 100 2 G941BW-200 2.38 90 100 2 1 ⁄ 2 G941BW-250 2.87 70 100 3 G941BW-300 3.44 65 100 4 G941BW-400 4.57 55 100 5 G941BW-500 5.57 45 20 or 100 6 G941BW-600 6.77 40 20 or 100
G941WS-SLR… FABRIC REINFORCED SOLARGUARD® TRANSFER
G941W… LOW-TEMP TRANSFER
Perfect for fish suction applications, Solarguard® Transfer is specially formulated to resist aging and cracking that can result from prolonged UV exposure and comes complete with a high-tensile strength polyester reinforcement and high-visibility yellow helix for easy identification. G941WS-SLR features a left-hand, counter-clockwise helix. Temperature Range: -20°C (-4°F) to 65°C (150°F). 8” G941WS-SLR-800 9.21” 60 psi Multiples of 20 ft
A mainstay in the fishing industry for over 40 years, G941W uses a high molecular compound to provide increased wear resistance and cold temperature flexibility making it a popular choice for herring, salmon, and groundfish transfer on fish pumps. G941W features a left-hand, counter-clockwise helix. Temperature Range : -40°C (-40°F) to 65°C (150°F). 6" G941W-600 7.00" 30 psi Multiples of 20 ft 8 G941W-800 9.18 30 Multiples of 20 ft 10 G941W-1000 11.56 25 Multiples of 20 ft 12 G941W-1200 13.64 20 Multiples of 20 ft
For pre-made stock assemblies in a variety of lengths, visit: www.greenlinehose.com
9
DISCHARGE & WASHDOWN HOSE ASSEMBLIES Hose I.D. Length Part Number G971... BLUE PVC LAY-FLAT Hose I.D. Length Part Number G1372... BLACK DRAGON
G1372 Black Dragon features "through-the-weave" construction and crimped end fittings to provide a long lasting discharge hose. Fire hose end fittings feature internal expansion attachment. Temperature Range : -37°C (-36°F) to 81°C (178°F). Complete with C & E Cam-Lock Ends 1 1 ⁄ 2 " 50 ft G1372-150CE50 2 50 G1372-200CE50 3 50 G1372-300CE50 4 50 G1372-400CE50 6 50 G1372-600CE50
Blue G971 is a lightweight, economical PVC Lay-Flat hose that rolls up tight when not in use. End fittings are attached by band clamps. Temperature Range : -15°C (5°F) to 55°C (131°F). 1 1 ⁄ 2 " 50 ft G971-150CE50 2 50 G971-200CE50 3 50 G971-300CE50 4 50 G971-400CE50 6 50 G971-600CE50 1 1 ⁄ 2 " 100 G971-150CE100 2 100 G971-200CE100 3 100 G971-300CE100 4 100 G971-400CE100 6 100 G971-600CE100 G972... RED PVC LAY-FLAT Complete with band clamp attached end fittings, G972 incorporates higher-tensile fabric reinforcement to allow for greater working pres sures than our G971. Temperature Range : -15°C (5°F) to 55°C (131°F). 1 1 ⁄ 2 " 50 ft G972-150CE50 2 50 G972-200CE50 3 50 G972-300CE50 4 50 G972-400CE50 6 50 G972-600CE50 1 1 ⁄ 2 " 100 G972-150CE100 2 100 G972-200CE100 3 100 G972-300CE100 4 100 G972-400CE100 6 100 G972-600CE100 G1921... SINGLE-JACKET DISCHARGE Complete with wire-bound attached end fittings, G1921 is tradition ally a woven jacket fire hose that some customers prefer over our other traditional discharge hoses. 2" 50 ft G1921-200CE50 100 G1921-200CE100
Complete with Brass NPSH Fittings 1 1 ⁄ 2 " 50 G1372-150B50 100 G1372-150B100
Complete with Forestry Fittings 1 1 ⁄ 2 " 50
G1372-150F50 G1372-150F100
100
Complete with Hard-coat Aluminum NPSH Fittings 1 1 ⁄ 2 " 50 G1372-150NP50
G975... GREEN PHTHALATE-FREE LAY-FLAT G975 is our phthalate-free discharge hose option and is popular in municipalities with ground water regulations. End fittings are attached by band clamps. Temperature Range : -10°C (14°F) to 65°C (149°F).
2"
50 ft
G975-200CE50 G975-300CE50 G975-400CE50 G975-600CE50
3 4 6
50 50 50
Can't Find The Assembly You're Looking For?
Our trained hose technicians can make any combination of hose assembly. You pick the hose, the ttings, and the length, and we'll do the rest!
10
SPECIALTY HOSE Standard
Working Pressure
Standard Length
I.D.
Part No.
O.D.
Length
I.D.
Part No.
O.D.
G940… OUTBOARD CABLE COVER
G900B... PITOT TUBING
Pitot tubing is used to connect the speedometer pressure sensor on a boat hull to the speedometer gauge on the instrument dash. Temperature Range : -5°C (-23°F) to 65°C (150°F). 5 ⁄ 32 " G900B-016-024 0.24" 30 psi 100 or 1200 ft
Originally designed as a vacuum hose, in the marine industry, G940 is popular for use as an outboard cable cover. This crushproof hose will return to its original shape when collapsed or twisted every time. Temperature Range : -40°C (-40°F) to 55°C (131°F). 1 1 ⁄ 4 " G940-125 1.60" 50 ft 1 1 ⁄ 2 G940-150 1.90 50 2 G940-200 2.45 50
Hose
Cuff
Part
Weight
Size
Diameter
Number
Each
G90… VINYL SCREW CUFFS
Vinyl Screw Cuffs are threaded to t over G940 hose, providing a tight seal and full internal ow.
1 1 ⁄ 4 "
1 1 ⁄ 4 "
G90-125-125 0.10 lb G90-150-125 0.15 G90-125-150 0.20 G90-150-150 0.18 G90-200-150 0.20 G90-150-200 0.20 G90-200-200 0.25
1 1 ⁄ 2 1 1 ⁄ 2 1 1 ⁄ 2 1 1 ⁄ 2
1 1 ⁄ 2 1 1 ⁄ 4 1 1 ⁄ 2
2
1 1 ⁄ 2
2 2
2
Swivel Cuffs 1 1 ⁄ 2
1 1 ⁄ 2
G90S-150-150 0.20 G90S-200-200 0.40
2
2
Wall
Standard Length
I.D.
Part No.
O.D.
Thickness
G830… SPLIT CONDUIT
Available in both polyethylene and nylon construction, split conduit, or split loom as it is often called, provides a convenient method for bundling electrical wire in marine applications. Temperature Range : -40°C (-40°F) to 93°C (200°F). G830N rated
to 125°C (257°F). Black Polyethylene 1 ⁄ 4 "
G830-025 G830-038 G830-050 G830-063 G830-075 G830-100 G830-125
0.39" 0.51 0.68 0.82 0.94
0.004" 0.005 0.005 0.005 0.005 0.006 0.006
500 ft
3 ⁄ 8 1 ⁄ 2 5 ⁄ 8 3 ⁄ 4
500 500 150 150 150 150
1
1.28 1.47
1 1 ⁄ 4
Black Nylon 7 ⁄ 16
G830N-044 0.58 G830N-063 0.82
0.005 0.005
1500 800
5 ⁄ 8
11
STAINLESS STEEL PIPE FITTINGS
GALVANIZED STEEL PIPE FITTINGS
Our stainless steel pipe ttings are all 150lb class Type 316 Stainless Steel for Schedule 40 pipe.
Standard galvanized steel pipe nipples are Schedule 40 welded parts with steel material according to ASTM A53 Type F CW.
G0808G… Coupling
G0808G… Reducing Coupling
G0808SS… Reducing Coupling
G0808SS… Coupling
G0816G… Bushing
G0808GU… Union
G0808SSU… Union
G0816SS… Bushing
G0898G… 90° Elbow
G0848SS… 45° Elbow
G0848G… 45° Elbow
G0898SS… 90° Elbow
G1648G… 45° Street Elbow
G0898G… 90° Reduc ing Elbow
G1698SS… 90° Street Elbow
G08T88SS… Tee
G08T88G… Tee
G1698G… 90° Street Elbow
G08X88SS… Cross
G0800SS… Cap
G08T88G… Reducing Tee
G1600SS… Plug
G08X88G… Cross
G1600HSS… Hollow Hex Plug
G1600HHSS… Hex Head Plug
G0800G… Cap
G1600G… Plug
G0008SS… Half Coupling
G1616SS… Pipe Nipple
G1616G… Pipe Nipple
G0819GFF… Floor Flange
G1616SSH… Hex Pipe Nipple
12
CAST BRASS PIPE FITTINGS These cast brass pipe ttings are all lead free for potable water use. Depending on your needs, Green Line also carries a wide variety of forged and extruded brass pipe ttings. Visit www.greenlinehose.com for more information.
HOSE SHANKS & COMBINATION NIPPLES
Green Line carries a large selection of hose barbs, menders, and combination nipples. For some marine fuel line and chemical ap plications, stainless hose ttings are preferred over brass or nylon. Combination nipples are most commonly used for water suction and discharge hoses, however the wide variety of materials has made them useful in many marine, chemical, and food applications.
G0808BU… Union
G0808B… Coupling
G20SS... Type 316 Stainless Steel Hose Mender
G20B… Brass Hose Mender
G0848B… 45° Elbow
G0816B… Bushing
G20B90… 90° Brass Hose Mender
G20BT… Brass Hose Mender Tee
G0898B… 90° Elbow
G1648B… 45° Street Elbow
G20N90… 90° Nylon Hose Mender
G20N… Nylon Hose Mender
G1698B… 90° Street Elbow
G08T88B… Tee
G21SS... Type 316 Stainless Steel Hose Barb
G20NT… Nylon Hose Mender Tee
G1600B… Plug
STRAINERS
G21B… Brass Hose Barb
Polyethylene strainers are used where weight or corrosion resistance are important. They are particularly popular in marine applications. For sh habitats, we offer a small hole strainer that adheres to the Department of Fisheries and Ocean’s recommendation of 1 ⁄ 10 " maxi mum screen hole size.
G21B45… 45° Brass Hose Barb
G21B90… 90° Brass Hose Barb
G21N90… 90° Nylon Hose Barb
G34P… Polyethylene Basket Strainer
G21N… Nylon Hose Barb
G34F… Small Hole Fish Habitat Strainer
G33B… Brass Combination Nipple
G33SS... Type 304 Stainless Steel Combination Nipple
G33N… Nylon Combina tion Nipple
G33G… Galvanized Steel Combination Nipple
13
ALUMINUM CAM-LOCKS
STAINLESS STEEL CAM-LOCKS
ALUMINUM WORKING PRESSURES 1 ⁄ 2 " to 2" 250 psi 2 1 ⁄ 2 " to 4" 150 5" & 6" 75 8" & 10" 50 Standard gaskets are rated to 105°C (221°F).
STAINLESS STEEL WORKING PRESSURES 3 ⁄ 4 " to 2" 250 psi 2 1 ⁄ 2 " to 4" 150 6" 100 Standard gaskets are rated to 105°C (221°F).
Our stainless steel cam-locks are manufactured from Type 316 Stain less Steel for maximum corrosion resistance. Care is taken at the factory to ensure a smooth nish on wetted surfaces to minimize bacteria build-up in sanitary applications. Female couplers are sup plied with locking clips.
Our aluminum cam-locks are manufactured from aluminum alloy 384 (JIS grade ADS12) and feature Type 316 Stainless Steel pins, forged brass handles, and plated steel nger rings. G65 couplings t Com mercial Item Description (CID) #A-A-59326B for sizes 3 ⁄ 4 " to 6” and will interchange with other couplings that meet this speci cation. Female couplers are supplied with locking clips.
G65A… Part A Female NPT Adapter
G65SSA… Part A Female NPT Adapter
G65B… Part B Male NPT Coupler
G65SSB… Part B Male NPT Coupler
G65C… Part C Hose Shank Coupler
G65SSC… Part C Hose Shank Coupler
G65D… Part D Female NPT Coupler
G65SSD… Part D Female NPT Coupler
G65E… Part E Hose Shank Adapter
G65SSE… Part E Hose Shank Adapter
G65F… Part F Male NPT Adapter
G65SSF… Part F Male NPT Adapter
G65DP… Part DP Dust Plug
G65SSDP… Part DP Dust Plug
G65DC… Part DC Dust Cap
G65SSDC… Part DC Dust Cap
Visit www.greenlinehose.com for our complete line of cam locks and cam-lock accessories including jump size cam locks, specialty cam-locks, and cam-lock accessories!
Safety Note : Cam-Locks should not be used with compressed air or other compressed gases.
14
BRASS CAM-LOCKS
POLYPROPYLENE CAM-LOCKS
BRASS WORKING PRESSURES 1 ⁄ 2 " to 2” 250 psi 2 1 ⁄ 2 ” to 4” 150 5” & 6” 75 8” 50 Standard gaskets are rated to 105°C (221°F).
POLYPROPYLENE WORKING PRESSURES AT 20°C* 3 ⁄ 4 " to 2" 100 psi 3" & 4" 50 psi
*As temperature rises, working pressures for these cam-locks drop dramatically. At 93°C, pressure ratings are reduced by 50% for polypropylene ttings. Polypropylene cam-locks are berglass reinforced for extra strength and are often used where weight is a concern. All sizes come com plete with stainless arms while female couplers are supplied with locking clips. Both the polypropylene cam-locks and the standard EPDM gaskets they come with are FDA compliant and suitable for a wide range of chemicals.
Brass cam-locks are used where the application requires corrosion resistance or extra strength. They are popular in marine refueling where durability, salt water resistance, and non-sparking features are all important. G65BR couplings are manufactured from copper alloy grade 377 to the Commercial Item Description (CID) #A-A-59326B speci cation. Female couplers are supplied with locking clips.
G65BRA… Part A Female NPT Adapter
G65PA… Part A Female NPT Adapter
G65PB… Part B Male NPT Coupler
G65BRB… Part B Male NPT Coupler
G65PC… Part C Hose Shank Coupler
G65BRC… Part C Hose Shank Coupler
G65BRD… Part D Female NPT Coupler
G65PD… Part D Female NPT Coupler
G65BRF… Part F Male NPT Adapter
G65PE… Part E Hose Shank Adapter
G65PF… Part F Male NPT Adapter
G65BRE… Part E Hose Shank Adapter
G65BRDP… Part DP Dust Plug
G65PDC… Part DC Dust Cap
G65PDP… Part DP Dust Plug
G65BRDC… Part DC Dust Cap
Safety Note : Cam-Locks should not be used with compressed air or other compressed gases.
15
STAINLESS STEEL VALVES
PVC VALVES
V400 series valves feature blowout-proof stems and lockable handles. The bodies and balls are investment cast Type 316 Stainless Steel, and the handles and stems are Type 304 Stainless Steel. Seals are Te on®, reinforced with glass bre. Temperature Range : -28°C (-20°F) to 232°C (450°F).
V201PVC valves are suitable for cold water distribution in light industrial, marine, and agricultural applications. They have Te on® and EPDM rubber seals and are rated for 150 psi at 20°C (68°F).
Pipe
Part No. Pipe Size IMPA Code V401… STAINLESS STEEL BALL VALVE
Part No. Size V201PVC… PVC BALL VALVE V201PVC-050 1 ⁄ 2 " V201PVC-075 3 ⁄ 4 " V201PVC-100 1" V201PVC-125 1 1 ⁄ 4 " V201PVC-150 1 1 ⁄ 2 " V201PVC-200 2" V201PVC-250 2 1 ⁄ 2 " V201PVC-300 3" V201PVC-400 4"
1000 psi water, oil, gas up to 1". 800 psi water, oil, gas 1 1 ⁄ 4 " – 2". 150 psi steam. V401-025 1 ⁄ 4 "
75-18-01 75-18-02 75-18-03 75-18-04 75-18-05 75-18-06 75-18-07 75-18-08
3 ⁄ 8 " 1 ⁄ 2 " 3 ⁄ 4 "
V401-038 V401-050 V401-075
V401-100 1" V401-125 1 1 ⁄ 4 " V401-150 1 1 ⁄ 2 " V401-200 2"
V402… FULL PORT STAINLESS BALL VALVE c/w MOUNTING PAD Two piece body with mounting pad. 2000 psi water, oil, gas up to 1". 1500 psi water, oil, gas 1 1 ⁄ 4 " – 2". 150 psi steam. V402-025 1 ⁄ 4 " V402-038 3 ⁄ 8 " V402-050 1 ⁄ 2 " V402-075 3 ⁄ 4 " V402-100 1"
V402-125 1 1 ⁄ 4 " V402-150 1 1 ⁄ 2 " V402-200 2"
V412… FULL PORT STAINLESS BALL VALVE Two piece body. 1000 psi water, oil, gas up to 2". 800 psi water, oil, gas 3" 150 psi steam. V412-025 1 ⁄ 4 " V412-038 3 ⁄ 8 " V412-050 1 ⁄ 2 " V412-075 3 ⁄ 4 " V412-100 1"
V412-125 1 1 ⁄ 4 " V412-150 1 1 ⁄ 2 " V412-200 2" V412-300 3"
V432… THREE-PIECE FULL PORT STAINLESS BALL VALVE
Three piece body. 1000 psi water, oil, gas. 150 psi steam.
V432-300 3”
16
BRASS VALVES
V200 Series cast brass valves are general service valves commonly used in a variety of applications in the marine industry. These valves feature chrome plated balls with Te on® seats, adjustable packing glands and blowout-proof stems. Our two-position ball valve features an L-pattern ow. Also known as a three-way diverter valve, they can direct ow either to the left or to the right with a 90° turn of the handle. Temperature Range : -20°C (-4°F) to 110°C (230°F). Part No. Pipe Size IMPA Code V201… STANDARD BRASS BALL VALVE Sizes 1 ⁄ 2 " to 2" are CSA approved under classes 3371-92, 3371-12, 3371-88, and 3371-08 for 1 ⁄ 2 psi natural gas. 600 psi water, oil, gas. 150 psi steam. V201-025 1 ⁄ 4 " V201-038 3 ⁄ 8 " V201-050 1 ⁄ 2 " V201-075 3 ⁄ 4 " V201-100 1"
Part No. Pipe Size V202L… BRASS BALL VALVE WITH LOCKING HANDLE Sizes 1 ⁄ 2 " to 2" are CSA approved under classes 3371-92, 3371-12, 3371-88, and 3371-08 for 1 ⁄ 2 psi natural gas. 600 psi water, oil, gas. 150 psi steam. V202L-025 1 ⁄ 4 " V202L-038 3 ⁄ 8 " V202L-050 1 ⁄ 2 " V202L-075 3 ⁄ 4 " V202L-100 1"
V202L-125 1 1 ⁄ 4 " V202L-150 1 1 ⁄ 2 " V202L-200 2"
V202H... REPLACEMENT HANDLES V202H-038 1 ⁄ 4 " to 3 ⁄ 8 " V202H-050 1 ⁄ 2 " V202H-075 3 ⁄ 4 " V202H-100 1" V202H-125 1 1 ⁄ 4 "
V201-125 1 1 ⁄ 4 " V201-150 1 1 ⁄ 2 " V201-200 2" V201-300 3"
V202H-200 1 1 ⁄ 2 " to 2" V202H-300 2 1 ⁄ 2 " to 3" V202H-400 4"
V201LM-025 1 ⁄ 4 ” mini-body & handle
V202… FULL PORT BRASS BALL VALVE Sizes 1 ⁄ 2 " to 2" are CSA approved under classes 3371-92, 3371-12, 3371-88, and 3371-08 for 1 ⁄ 2 psi natural gas. 600 psi water, oil, gas. 150 psi steam. V202-013 1 ⁄ 8 " V202-025 1 ⁄ 4 " V202-038 3 ⁄ 8 " 75-24-01 V202-050 1 ⁄ 2 " 75-24-02 V202-075 3 ⁄ 4 " 75-24-03 V202-100 1" 75-24-04 V202-125 1 1 ⁄ 4 " 75-24-05 V202-150 1 1 ⁄ 2 " 75-24-06 V202-200 2" 75-24-07 V202-250 2 1 ⁄ 2 "
V203... TWO POSITION BRASS BALL VALVE Flow can be directed from center port to either side port. 400 psi water, oil, gas. 150 psi steam. V203-025 1 ⁄ 4 " V203-038 3 ⁄ 8 " V203-050 1 ⁄ 2 " V203-075 3 ⁄ 4 " V203-100 1"
V203-125 1 1 ⁄ 4 " V203-150 1 1 ⁄ 2 " V203-200 2" V203-125 V203-150 V203-200
V202-300 3" V202-400 4"
17
NOZZLES & COUPLINGS
Part No.
Description
Part No.
Description
PISTOL GRIP NOZZLES & ATTACHMENTS
BRASS NOZZLES Nozzles without shut-offs
Heavy duty nozzle rated to 70°C (158°F) Includes threaded front, rubber cap and ThermoGuard comfort grip
Miniature brass tapered nozzle with 1 ⁄ 8 " ori ce
855012-5001
G37M-GHT
Long brass tapered nozzle with 1 ⁄ 4 " ori ce
G37-GHT
Twist shut-off nozzles G97B-GHT
Heavy duty nozzle rated to 38°C (100°F) Includes threaded front and rubber cap as well as insulated grip
Miniature brass twist nozzle
572TFRL
G37AB-GHT
4" long twist nozzle
Gilmour heavy-duty twist nozzle with rubber grip
Zinc Nozzle rated to 38°C (100°F)
528
573TF
G07Y77… ‘Y’ COUPLINGS
G07Y77B
Forged brass
TRIGGER GUARD NOZZLE
50502
Insulated nozzle
G07Y77Z
Cast zinc
G07Y77BV
Forged brass with valves
GREEN PLASTIC FOG NOZZLE
G97-GHT
Garden hose thread
Grey plastic with valves, heavier pattern Grey
G07Y77PVG
STAINLESS HOSE HANGERS
These attractive and functional hose hangers are made from Type 304 stainless steel and come complete with stainless mounting screws. Their stainless heavy duty construction make them perfect for sanitary and marine applications. They also look great in residential use.
HH-L
G07Y77ZV
Cast zinc with valves
HH-M
Forged '4-Way' Manifold with Valves
G07M77BV
Part No. Approximate Capacity Height Width Depth
Weight
HH-S 100 ft of 1 ⁄ 2 " I.D. hose 6.5"
3.0" 5.8"
0.8 lb
HH-M 100 ft of 3 ⁄ 4 " I.D. hose 8.5 8.0 8.0 100 ft of 1 1 ⁄ 4 " O.D. hose 11.0 11.5 7.0 HH-L
1.5 2.5
18
STAINLESS STEEL BOLT CLAMPS
Where most T-Bolt clamps feature a plated steel fastener, ours is all stainless. This makes the KODIAK® ideal for many marine clamping applications, especially where gear clamps do not provide adequate holding or tightening strength. In addition, KODIAK® clamps ful ll a wide range of industrial applications such as engine coolant, water suction & discharge, and hydraulic suction. G89 clamps feature a 3 ⁄ 4 " wide by 0.025" thick type 301 stainless band. The type 302 stainless bolt is fasted by a type 304 nylon inserted locknut. The locknut is rated to 120°C (248°F) and may be tightened to 50 inch lbs.
G94 Bolt Clamps are constructed entirely of Type 304 Stainless Steel. They are ideal for a variety of applications including marine radiator hoses, water suction and discharge service, and hydraulic suction lines. The unique design allows for easy and fast tightening with a standard socket wrench. The wider bands also have bevelled edges to prevent damage to the hose cover.
Size
Size
Part Number
Range
Range
Band Width
G94… HEAVY-DUTY BOLT CLAMP G94-1719
17 - 19 mm 0.67 - 0.75"
0.708" 0.708 0.708 0.708 0.708 0.708 0.787 0.787 0.787 0.787 0.787 0.787 0.787 0.787 0.787 0.787 0.787 0.984 0.984 0.984 0.984 0.984 0.984 0.984 0.984 0.984
Size
Size
G94-1921 G94-2123 G94-2325 G94-2527 G94-2729 G94-2931 G94-3134 G94-3437 G94-3740 G94-4043 G94-4347 G94-4751 G94-5155 G94-5559 G94-5963 G94-6368 G94-6873 G94-7379 G94-7985 G94-8591 G94-9197 G94-97104
19 - 21 21 - 23 23 - 25 25 - 27 27 - 29 29 - 31 31 - 34 34 - 37 37 - 40 40 - 43 43 - 47 47 - 51 51 - 55 55 - 59 59 - 63 63 - 68 68 - 73 73 - 79 79 - 85 85 - 91 91 - 97 97 - 104
0.75 - 0.83 0.83 - 0.91 0.91 - 0.98 0.98 - 1.06 1.06 - 1.14 1.14 - 1.22 1.22 - 1.34 1.34 - 1.46 1.46 - 1.57 1.57 - 1.69 1.69 - 1.85 1.85 - 2.01 2.01 - 2.17 2.17 - 2.32 2.32 - 2.48 2.48 - 2.68 2.68 - 2.87 2.87 - 3.11 3.11 - 3.35 3.35 - 3.58 3.58 - 3.82 3.82 - 4.09 4.09 - 4.41 4.41 - 4.76 4.76 - 5.12
Part Number
Range
Range
Band Width
G89… KODIAK® T-BOLT CLAMP G89-022
35 - 39 mm 1.38 - 1.52”
0.750” 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750
G89-024 G89-026 G89-028 G89-030 G89-032 G89-034 G89-036 G89-038 G89-040 G89-042 G89-044 G89-046 G89-049 G89-052 G89-054 G89-057 G89-061 G89-065 G89-069 G89-073 G89-077 G89-081 G89-085 G89-089 G89-096 G89-100 G89-104 G89-108 G89-116 G89-124 G89-132 G89-135 G89-148 G89-164
38 - 42 41 - 48 44 - 51 48 - 54 51 - 57 54 - 60 57 - 65 60 - 68 64 - 71 67 - 75 70 - 78 73 - 81 78 - 86 83 - 90 86 - 94 90 - 99 97 - 105 103 - 111 109 - 118 116 - 124 122 - 130 129 - 137 135 - 143 141 - 149 152 - 160 159 - 167 165 - 173 172 - 179 184 - 192 197 - 205 210 - 217 214 - 222 235 - 243 260 - 268
1.50 - 1.64 1.63 - 1.88 1.75 - 2.00 1.88 - 2.13 2.00 - 2.25 2.13 - 2.38 2.25 - 2.56 2.38 - 2.69 2.50 - 2.81 2.63 - 2.94 2.75 - 3.06 2.88 - 3.19 3.06 - 3.38 3.25 - 3.56 3.38 - 3.69 3.56 - 3.88 3.81 - 4.13 4.06 - 4.38 4.31 - 4.63 4.56 - 4.88 4.81 - 5.13 5.06 - 5.38 5.31 - 5.63 5.56 - 5.88 6.00 - 6.31 6.25 - 6.56 6.50 - 6.81 6.75 - 7.06 7.25 - 7.56 7.75 - 8.06 8.25 - 8.56 8.44 - 8.75 9.25 - 9.56
G94-104112 104 - 112 G94-112121 112 - 121 G94-121130 121 - 130 121 - 130
10.25 - 10.56 0.750
Mini Bolt Clamps provide a sure seal on small diameter tubing and thin walled hoses. The clamp edges are rolled to prevent hose dam age. These tiny clamps are made entirely of Type 304 Stainless Steel. Size Size Cross Part Number Range Range Reference G5AB... MINI BOLT CLAMP
G5AB-08 7.5 - 8.5 mm 0.30 - 0.33" 306008 G5AB-09 8.5 - 9.5 0.33 - 0.37 306009 G5AB-10 9.5 - 11.0 0.37 - 0.43 306010 G5AB-11 10.5 - 12.0 0.41 - 0.47 306011 G5AB-12 11.5 - 13.0 0.45 - 0.51 306012 G5AB-13 12.5 - 14.0 0.49 - 0.55 306013 G5AB-14 13.5 - 15.0 0.53 - 0.59 306014 G5AB-15 14.5 - 16.0 0.57 - 0.63 306015 G5AB-16 15.0 - 17.0 0.59 - 0.67 306016 G5AB-17 16.0 - 18.0 0.63 - 0.71 306017
19
STAINLESS STEEL GEAR CLAMPS
G5 Series Gear Clamps are manufactured entirely using Type 316 Stainless Steel for extra corrosion resistance. Designed for use in marine applications where Type 201 and 301 Stainless are unable to stand up to corrosion, G5 Clamps are ideal for shipbuilding, marine engine repair, water treatment plant, and chemical plant applica tions. G5M Micro Gear Clamps feature a 1 ⁄ 4 " wide band, while G5 Gear Clamps have a 1 ⁄ 2 " wide band.
Our Green Line G8 series clamps are completely stainless steel. The G8M clamps have a 5 ⁄ 16 " wide type 301 stainless band with a type 410 stainless screw. G8 clamps have a 1 ⁄ 2 " wide, 300 series stainless band and screw. Nom. Min. Max. Pkg Part No. Size Size Size Qty G8M… ALL STAINLESS STEEL MICRO GEAR CLAMP G8M-04 1 ⁄ 4 " 0.22" 0.63" 10 G8M-05 5 ⁄ 16 0.43 0.71 10 G8M-06 3 ⁄ 8 0.31 0.88 10 G8M-08 1 ⁄ 2 0.44 1.00 10 G8M-10 5 ⁄ 8 0.50 1.06 10 G8M-12 3 ⁄ 4 0.56 1.25 10 G8M-16 1 0.69 1.50 10 G8M-24 1 1 ⁄ 2 1.31 2.00 10 G8M-32 2 1 ⁄ 8 1.81 2.50 10 G8M-36 2 1 ⁄ 4 2.06 2.75 10
Nom.
Min.
Max. Size
Pkg
Part No. Qty G5M… TYPE 316 STAINLESS STEEL MICRO GEAR CLAMP G5M-04 1 ⁄ 4 " 0.31" 0.63" 10 G5M-06 3 ⁄ 8 0.44 0.88 10 Size Size
G5… TYPE 316 STAINLESS STEEL GEAR CLAMP G5-10 5 ⁄ 8 " 0.56" 1.06" 10 G5-12 3 ⁄ 4 0.56 1.25 10 G5-16 1 0.69 1.50 10 G5-20 1 1 ⁄ 4 0.75 1.75 10 G5-24 1 1 ⁄ 2 1.06 2.00 10 G5-28 1 3 ⁄ 4 1.31 2.25 10 G5-32 2 1.56 2.50 10 G5-36 2 1 ⁄ 4 1.81 2.75 10 G5-44 2 3 ⁄ 4 2.31 3.25 10 G5-52 3 1 ⁄ 4 2.81 3.75 10 G5-60 3 3 ⁄ 4 3.31 4.25 10 G5-72 4 1 ⁄ 2 3.00 5.00 10
G8… ALL STAINLESS STEEL GEAR CLAMP G8-06 3 ⁄ 8 " 0.44" 0.88" 10 G8-08 1 ⁄ 2 0.44 1.00 10 G8-10 5 ⁄ 8 0.56 1.06 10 G8-12 3 ⁄ 4 0.56 1.25 10 G8-16 1 0.69 1.50 10 G8-20 1 1 ⁄ 4 0.75 1.75 10 G8-24 1 1 ⁄ 2 1.06 2.00 10 G8-28 1 3 ⁄ 4 1.31 2.25 10 G8-32 2 1.56 2.50 10 G8-36 2 1 ⁄ 4 1.81 2.75 10 G8-40 2 1 ⁄ 2 2.06 3.00 10 G8-44 2 3 ⁄ 4 2.31 3.25 10 G8-48 3 2.56 3.50 10 G8-52 3 1 ⁄ 4 2.81 3.75 10 G8-56 3 1 ⁄ 2 3.06 4.00 10 G8-60 3 3 ⁄ 4 3.31 4.25 10 G8-64 4 2.50 4.50 10 G8-72 4 1 ⁄ 2 3.00 5.00 10 G8-80 5 3.50 5.50 10 G8-84 5 1 ⁄ 4 3.75 5.75 10 G8-88 5 1 ⁄ 2 4.00 6.00 10 G8-96 6 4.50 6.50 10 G8-104 6 1 ⁄ 2 5.00 7.00 10 G8-116 7 5.75 7.75 10 G8-128 8 6.50 8.50 10 G8-152 9 1 ⁄ 2 2.00 10.00 10 G8-164 10 1 ⁄ 4 1.75 10.75 10 G8-188 11 3 ⁄ 4 2.25 12.25 10 G8-200 12 1 ⁄ 2 11.00 13.00 10 G8-212 13 1 ⁄ 4 11.75 13.75 10 G8-248 15 1 ⁄ 2 2.00 16.00 10 G8-270 16 7 ⁄ 8 15.38 17.38 10 G8-312 19 1 ⁄ 2 18.00 20.00 10 G8-390 24 3 ⁄ 8 22.88 24.88 10 G8-390
These European style clamps (originally manufactured in Sweden and sold in the marine market under the brand names ABA and AWAB) are now manufactured in North America. G5A Series Clamps feature a non-perforated band with rolled edges that provides superior sealing and prevents hose damage while the ne pitch threads and riveted housing create a clamp with a very high sealing force. G5AM Clamps have a 3 ⁄ 8 " wide band while G5A clamps have a 1 ⁄ 2 " wide band. In marine and corrosive applications, where safety and reliability are top considerations, these premium Type 316 Stainless Steel clamps are an excellent choice. Nom. Min. Max. Cross Part No. Size Size Size Reference G5AM... EUROPEAN STYLE TYPE 316 STAINLESS STEEL MICRO GEAR CLAMP G5AM-03 3 ⁄ 8 " 0.31" 0.55" 319014 G5AM-04 1 ⁄ 2 0.43 0.67 319017 G5AM-06 5 ⁄ 8 0.51 0.79 319020 G5A... EUROPEAN STYLE TYPE 316 STAINLESS STEEL GEAR CLAMP G5A-08 3 ⁄ 4 " 0.59" 0.94" 316024 G5A-10 7 ⁄ 8 0.75 1.10 316028 G5A-12 1 0.87 1.26 316032 G5A-16 1 1 ⁄ 4 1.02 1.50 316038 G5A-20 1 1 ⁄ 2 1.26 1.73 316044 G5A-24 1 3 ⁄ 4 1.50 1.97 316050 G5A-28 2 1.26 2.24 316057 G5A-32 2 1 ⁄ 4 1.50 2.52 316064 G5A-36 1 1 ⁄ 2 1.73 2.75 316070
20
Made with FlippingBook flipbook maker