HydroExcavation

CLAMPS

DOUBLE-BOLT CLAMPS Our double-bolt G38 clamps are made from plated ductile iron. In the smaller sizes ( 3 ⁄ 4 " to 2), they are popular for hydraulic suction lines, while larger clamps are often used for irrigation and general suction and discharge service

SPIRAL DOUBLE-BOLT CLAMPS Spiral double-bolt clamps are designed to provide superior sealing on corrugated PVC suction hoses such as G941WS. Please note, different manufacturers may use either a clockwise or counter-clockwise spiral in their hose. Our standard corrugated hoses spiral in the counter clockwise direction (similar to a left hand thread). G38W clamps are designed for that spiral only. For clockwise spiral clamps, specify G38WR

T-BOLT CLAMPS Where most T-Bolt clamps feature a plated steel fastener, ours is all stainless. This makes the Kodiak® T-Bolt Clamp ideal for a variety of applications, especially where gear clamps do not provide adequate holding or tightening strength. G89 Kodiak® clamps feature a ¾" wide by 0.025" thick Type 301 stainless band. The Type 302 stainless bolt is fastened by a Type 304 nylon inserted locknut. The locknut is rated to 120°C (248°F) and may be tightened to 50 inch lbs.

PUNCH CLAMPS Our punch clamps are double wrapped and formed to a given diam eter, with sizes ranging from 13 ⁄ 16 " to 8" I.D. All punch clamps can be pulled down to a smaller diameter using a punch clamp tool but cannot be adjusted to a larger diameter. We offer a variety of punch clamp options including stainless steel punch clamps for improved corrosion resistance.

PC

PC-S

P-1

16