DiagnosticHose&Fittings

DIAGNOSTIC TEST POINTS EXPLAINED

Fluid Sample Allow fluid sampling for preventative maintenance.

Valves, Cylinders, Actuators

Temperature Find out if your system is operating within the correct temperature specifications.

System Pressure Make sure your components are receiving adequate pressure.

Outlet Pressure Test your system for proper working pressure. Use TG08 to thread directly to the test point even against active pressure.

Return Pressure Confirm that there is minimal pressure on your return line. Back pressure can adversely affect system performance.

Pump

Filter

Operator Safety Use a T101 Micro-Bore Test Point Assembly to ensure the operator is a safe distance from dangerous components.

Inlet Vacuum Ensure your pump is getting the proper feed of oil to prevent cavitation.

Reservoir

11