LubricationHose&Fittings

LUBRICATION TUBING

G880B… NYLON GREASE TUBING

Fractional Tubing Designed speci cally for lubrication and grease applications, G880B fractional tubing features higher working pressures when compared to standard nylon tubing. Nylon has good abrasion resistance, stays exible at low temperatures, is resistant to most chemicals, and is stabilized against UV rays making it ideal for outdoor use. Sold by the ft, G880B fractional tubing features a 4:1 safety factor and is in com pliance with UL94 HB. Construction : Smooth, black, polyamide 12 tubing. Durome ter rating Shore D 70. Temperature Range : -50°C (-58°F) to 93°C (200°F). Metric Tubing Used in central lubrication systems to connect the distribu tion unit with the different lubrication points, G880B metric tubing is heat and UV resistant and has excellent resistance to grease, oil, as well as a wide range of fuels and chemicals. With higher working pressures compared to standard nylon tubing, this semi-rigid nylon grease tubing features a 3:1 safety factor and is in compliance with DIN 73378. G880B metric tubing is sold in 25 m coils and is available both un lled and pre lled with NLGI EP #2 grease. Construction : Smooth, black, semi-rigid, polyamide 12 HL tubing. Temperature Range : -60°C (-76°F) to 80°C (176°F). Part Wall O.D.* Number I.D. 1 ⁄ 4" G880B-04 0.150" 0.050" 800 psi 3200 psi

Working Min. Burst Min. Bend Weight

Standard

Thickness Pressure Pressure Radius

per ft

Length

0.8"

0.014 lb 100 or 500 ft

Part

Wall

Working Min. Burst Min. Bend Weight Min. Bend Weight

O.D.* Length Number

I.D.

Thickness Pressure Pressure Radius Each

6 mm 25 m G880B-06MX25M 0.118” 0.059” 1290 psi 3870 psi 2.0”

1.28 lb

Grease Filled Tubing For those customers that require it, G880B grease lled tubing is available in 25 m lengths, pre lled with NLGI EP #2 grease. This natural coloured, lithium based, multipurpose grease features increased oxidation stability and corrosion protection and provides protection against frictional corro sion and abrasion. It is commonly used for greasing appli cations that include roller bearings, high and temporary compressive loads and vibrations, and high temperatures. It is excellent for use in all kinds of central lubrication systems.

Part

Weight

Number Length Each G880B-06MGR25M 25 m 1.54 lb

Penetration at 25°C worked 60 strokes

280 – 310

Soap Type

Lithium Complex

Dropping Point (°C)

190 190

Base Oil Viscosity, cSt at 40°C

Colour

Natural Buttery

Appearance

Rust Prevention

N/A

*Note: Unlike hose, nylon grease tubing is ordered by outside diameter (O.D.). Use push-to-connect lubrication tube ttings for lubrication and grease applications. 5 pulsarhydraulics.com