LubricationHose&Fittings

PRESSURE GAUGES

Liquid filled pressure gauges are well suited for hydraulic, oil and gas, pressure wash, and process systems. The liquid provides significant cushioning to reduce pointer flutter and internal damage. Center back mount gauges are available by specifying "-CBM" after PG in the part number. Center back mount gauges can be ordered with a U-clamp or front flange mounting option.

PG… LIQUID FILLED PRESSURE GAUGE

Part Number

Description

PG

2.5" face with 1 ⁄ 4 " bottom mount 2.5" face with 1 ⁄ 4 " center back mount

PG

PG-CBM

Accuracy…

±1.6% B40.1 Grade A

Socket Material… Brass Bourdon tube… Bronze Case…

Type 304 Stainless Steel

Window… Filling… Thread… Mount…

Polycarbonate

Silicone 1 ⁄ 4 " NPT

Bottom Temperature Range… -40°C (-40°F) to 65°C (149°F)

PRESSURE RANGES AVAILABLE…

Dash Size

Pressure Range psi

kPa

-3000 -5000 -6000

0-3000 0-5000 0-6000 0-10000

0-20000 0-30000 0-40000 0-60000

PG-CBM

-10000

For best results, please adhere to the following recommendations: ■■ When calibrating gauges, choose a calibration pressure that is in the middle range of the gauge (between the ten o’clock and two o’clock position of the dial). ■■ Remember to prick a hole or cut the tip off of the vent plug to bring the internal pressure back to atmospheric pressure. ■■ Ensure all gauges are mounted upright to avoid fluid leakage.

SUPPORT CLAMPS

G6 Support Clamps are made from galvanized steel and are dipped in vinyl to prevent chafing. When compared to our more economical G6N Rubber Cushioned Support Clamps, our G6 Support Clamps provide a cleaner looking installation when supporting pipe, tubing, cables, or hose. They feature a 3 ⁄ 4 " wide heavy duty strap and 13 ⁄ 32 ” bolt hole.

HOSE GUARDS

G6… SUPPORT CLAMP

Part Number

Our Plastic Hose Guard is a flat, plastic, armour guard designed to offer both abrasion and kink resistance. This lightweight, plastic coil is made from abrasion and petroleum resistant thermoplastic and can also be used to bundle multiple hose lines together.

Inside Diameter

G6-04 G6-06 G6-07 G6-08 G6-09

1 ⁄ 4 " 3 ⁄ 8 "

7 ⁄ 16 "

1 ⁄ 2 "

PG… PLASTIC HOSE GUARD

9 ⁄ 16 "

Part Number

G6N Rubber Cushioned Support Clamps are used to support pipe, tubing, cables, or hose. They have a 1 ⁄ 2 " wide galvanized steel strap fitted with a rubber liner to prevent chafing. The bolt hole measures 0.256”.

Guard I.D.

Fits Hose O.D.

Standard Length

PG-025 0.28" PG-038 0.40" PG-050 0.50"

1 ⁄ 8 " – 1 ⁄ 4 " 1 ⁄ 4 " – 1 ⁄ 2 " 1 ⁄ 2 " – 3 ⁄ 4 "

100 ft

100 100

G6N… RUBBER CUSHIONED SUPPORT CLAMP Part Number Inside Diameter G6N-04 1 ⁄ 4 " G6N-06 3 ⁄ 8 " G6N-08 1 ⁄ 2 "

11

pulsarhydraulics.com

Made with FlippingBook Ebook Creator