IndustrialHose26thEdition

CHEMICAL TRANSFER HOSE

Safety Note: Paint at high pressure is a dangerous and potentially lethal product. Never approach a leaking hose, and never try to stem the flow of a leaking hose. Once a hose has been used, crimp fittings cannot be installed. NEVER ATTEMPT TO REPAIR AN AIRLESS PAINT SPRAY HOSE.

G1850... WIRE BRAID PAINT SPRAY

Tube: Smooth extruded Nylon 6. Reinforcement: Brass coated high-tensile steel wire. Sizes 3 ⁄ 16 ", 1 ⁄ 4 " and 3 ⁄ 4 " have one wire braid while the 3 ⁄ 8 " has two wire braids separated by a thermoplastic cushioning layer. Cover: Smooth, blue, abrasion-resistant pin-pricked polyure thane. Temperature Range: -40°C (-40°F) to 100°C (212°F). Fittings : Factory installed special wire braid paint spray fittings. All Wire Braid Paint Spray hose assemblies are tested for electric conductivity before leaving our facilities and are fitted with special female swivel NPSM threaded fittings on assemblies up to 3 ⁄ 8 " I.D. and solid male NPT threaded fittings in 3 ⁄ 4 ". Hose whips come complete with female swivel NPSM x solid male NPT end fittings. Other lengths are available by special request. G1850 Airless Paint Spray uses a wire braid for maximum op erator safety. The wire is protected by urethane, which is an extremely abrasion-resistant product that also stays flexible at low temperatures. The nylon tube is resistant to a wide variety of solvents, chemicals, and paints. Assemblies are permanently fitted with female NPSM (straight pipe) swivel ends in sizes up to 3 ⁄ 8 " and solid male NPT ends in 3 ⁄ 4 ". Whip hoses are female NPSM at one end and male NPT at the other. All assemblies are factory crimped and are electrically conductive to avoid static build-up.

G1850

Chemical

Part

Working Pressure

Bend Radius

Weight per ft 0.08 lb

I.D. 3 ⁄ 16 "

Number G1850-03 G1850-04 G1850-06 G1850-12

O.D.

0.37" 5000 psi

1.2"

1 ⁄ 4 3 ⁄ 8 3 ⁄ 4

0.46 5000 0.67 5500 1.01 1750

1.6 5.1 6.0

0.11 0.28 0.36

I.D.

Thread

Length Part Number

Weight each

Complete with Female Swivel NPSM Ends 3 ⁄ 16 " 1 ⁄ 4 " 3 ft

G1850-03FF3 G1850-03FF10 G1850-03FF12 G1850-03FF15 G1850-04FF3 G1850-04FF6 G1850-04FF10 G1850-04FF15 G1850-04FF25 G1850-04FF30 G1850-04FF50

0.5 lb

3 ⁄ 16 3 ⁄ 16 3 ⁄ 16

1 ⁄ 4 1 ⁄ 4 1 ⁄ 4 1 ⁄ 4 1 ⁄ 4 1 ⁄ 4 1 ⁄ 4 1 ⁄ 4 1 ⁄ 4 1 ⁄ 4 1 ⁄ 4 3 ⁄ 8 3 ⁄ 8 3 ⁄ 8 3 ⁄ 8

10 12 15

1.0 1.2 1.4 0.6 1.0 1.3 1.9 3.1 3.5 5.8

1 ⁄ 4 1 ⁄ 4 1 ⁄ 4 1 ⁄ 4 1 ⁄ 4 1 ⁄ 4 1 ⁄ 4 1 ⁄ 4 3 ⁄ 8 3 ⁄ 8 3 ⁄ 8 3 ⁄ 8

3 6

10 15 25 30 50

100 G1850-04FF100

11.2

10 25 50

G1850-06FF10 G1850-06FF25 G1850-06FF50

3.2 7.4

14.4 28.4

100 G1850-06FF100

Complete with Solid Male NPT Ends 3 ⁄ 4 3 ⁄ 4 10

G1850-12MM10 G1850-12MM20

2.8

3 ⁄ 4 5.6 Hose Whips complete with Female Swivel NPSM x Solid Male NPT Ends 3 ⁄ 16 1 ⁄ 4 3 G1850-03MF3 0.5 3 ⁄ 16 1 ⁄ 4 6 G1850-03MF6 0.8 1 ⁄ 4 1 ⁄ 4 6 G1850-04MF6 0.9 3 ⁄ 4 20

101