IndustrialFittings26thEdition
THREAD-TO-CONNECT TEST POINT COUPLINGS
Diagnostic test points or test ports are used to monitor pressures in hydraulic systems and can also be used to vent hydraulic systems and draw fluid samples for contamination measurement. Galvanized carbon steel construction with Buna-N (Nitrile) seals allow for working temperatures up to 125°C (257°F) for all hydraulic and mineral oils. Rated to 9100 psi, these test points feature an M16 X 2.0 thread-to-connect body and are interchangeable with Stauff Test 20, Parker EMA3, Cejn Press-Check, Voss Point Measuring, and Tompkins Test Point designs. Temperature Range : -30°C (-22°F) to 125°C (257°F). Interchange : Stauff Test 20, Parker EMA3, Cejn Press-Check, Voss Point Measuring, Tompkins Test Point.
Bulkhead Test Points are often used to group together multiple test points at one central service point. Unvalved Bulkhead Gauge Adapters allow pressure gauges to be permanently installed into the manifold while T00BH Bulkhead Test Points allow users to use a T101 Micro-Bore hose assembly to access hard to reach test points. Use these bulkhead adapters to help cut down on maintenance time when there are a large number of test points or they are difficult to access.
Part Number
Thread Size
4
TG08BH… UNVALVED HOSE BULKHEAD GAUGE ADAPTER
TG08BH-04
1 ⁄ 4 -18
Part Number Thread Size T16… TEST POINT WITH NPTF THREAD
T00BH… TEST POINT WITH BULKHEAD HOSE ADAPTER
T16-02 T16-04
1 ⁄ 8 -27 1 ⁄ 4 -18
T00BH
Quick Couplings
T11… TEST POINT WITH O-RING BOSS THREAD
T11-02 T11-04 T11-06
5 ⁄ 16 -24 7 ⁄ 16 -20 9 ⁄ 16 -18
T00… UNVALVED HOSE CONNECTOR Unvalved hose connectors allows users to connect two or more test point hose assemblies together to create varying hose lengths.
T36… TEST POINT WITH BSPP THREAD
T36-02 T36-04 T36-06
1 ⁄ 8 -28 1 ⁄ 4 -19 3 ⁄ 8 -19
T00
T38… TEST POINT WITH BSPT THREAD
T38-02 T38-04
1 ⁄ 8 -28 1 ⁄ 4 -19
T72… TEST POINT WITH METRIC DIN PORT THREAD
For Test Point Micro-Bore assemblies, adapters, crimp couplings, and more, see our Pulsar Hydraulics Catalog or visit www.greenlinehose.com
T72-08 T72-10
M8 x 1.0 M10 x 1.0
T72-10X1.50
M10 x 1.50*
T72-12 T72-14 T72-16
M12 x 1.5 M14 x 1.5 M16 x 1.5
*Denotes non-standard
TG08… DIRECT GAUGE COUPLER Direct Gauge Couplers are used to connect pressure gauges or sensors directly to the test point. TG08-04 1 ⁄ 4 -18
60
Made with FlippingBook Online newsletter creator