IndustrialFittings26thEdition

FUEL HOSE SWIVELS & TANK ACCESSORIES

1

Designed for use with fuel oil nozzles and hose assemblies, our range of fuel hose swivels help to prevent hose kinking and twisting as well as the physical strain of aligning the nozzle with the fillpipe.

The 2000L and 2500L are automatic pressure and vacuum relief caps for farm and industrial fuel storage tanks. The normally closed relief valve prevents fuel evaporation and dust contamina tion. It vents at 2 psi pressure or 0.7"Hg vacuum. These locking vent caps feature an aluminum body, cap, and valve plate along with Type 304 Stainless Steel springs. A brass screen and FPM (Viton®) O-ring come standard. These vent caps have an NPS male threaded body with a lockable cap (padlock not included).

Pipe

Cross

Part No.

Size/Material

Reference

FUEL HOSE SWIVELS G1608XA-075

Cam-locks & Fuel

3 ⁄ 4 " Aluminum/zinc 1" Aluminum/zinc

36S-5080 36S-5090

Part No.

Description

G1608XA-100

LOCKING VENT CAP

G1608XAU-075 360°- 3 ⁄ 4 " Aluminum/zinc G1608XAU-100 360°- 1" Aluminum/zinc

2000L 2500L

2" Locking Vent Cap 2 1 ⁄ 2 " Locking Vent Cap

The 500AV and 525AV are pressure and vacuum relief caps for farm and industrial storage tanks and are normally connected directly to the outlet. The lockable cap rotates to control gravity flow of fuel from above ground storage tanks to the fuel dispens ing nozzle. These angle valves are designed to connect to NPT threaded hose and tank connections and come standard with a zinc cap and Buna-N (Nitrile) seal. Padlock is not included.

1 1 ⁄ 4 " Aluminum 1 1 ⁄ 2 " Aluminum 2" Aluminum

G1608XA-125 G1608XA-150 G1608XA-200

SWMF-125 SWMF-150 SWMF-200

LOCKABLE ANGLE VALVES

500AV 525AV

1" NPT Valve 1 1 ⁄ 4 " NPT Valve

Due to the internal pressure build caused by the sloshing of fuel and heat expansion, vents for mobile tanks have a higher open ing pressure than vents on stationary tanks. The pressure vents between 7.5 and 9 psi or 0.33" Hg vacuum. This locking mobile vent cap features an aluminum body, cap, and valve plate along with Type 304 Stainless Steel springs. An acetal (POM) piston and FPM (Viton®) O-ring come standard. 200-PV-9 features an NPS male thread and is lockable to prevent theft and tampering (padlock not included).

LOCKING VENT CAP FOR MOBILE TANKS

200-PV-9

2" Locking Mobile Vent Cap

18