IndustrialFittings26thEdition

CRIMP SLEEVES

Nominal

Sleeve Sleeve

CHOOSING A STEEL SLEEVE: In general, sleeves should be at least 1 ⁄ 4 " shorter than the hose barb, and placed just ahead of the end barb on the fitting. Approxi mate barb lengths for popular fittings are given in the table below. Short sleeves are generally suitable for attaching G33 style combina tion nipples. Longer sleeves are preferred for G65 cam-locks. For steam and for high pressure air service in larger sizes, G29C interlocking clamps should be used instead of steel sleeves. Hose Fitting style and barb length Size G23S G25 G33 G65

Part No.

Hose Size I.D.

Length

G3S… PLATED STEEL HOSE SLEEVE

Long Sleeves G3S-113

3 ⁄ 4 " 3 ⁄ 4 "

1.13" 1.38" 1.50" 1.63" 1.75" 2.13" 2.63" 2.75" 2.88" 3.13" 3.38" 3.63" 3.61" 3.75" 3.88" 4.00" 4.38" 4.63" 4.75" 4.83" 4.94" 6.50" 6.75" 6.88" 7.00" 7.13" 8.50" 9.00"

2.13" 2.13" 2.31" 2.31" 2.31" 2.38" 2.75" 2.75" 2.75" 3.13" 3.13" 3.94" 3.94" 3.94" 3.94" 3.94" 4.19" 4.19" 4.19" 4.19" 4.19" 5.67" 5.67" 5.67" 5.67" 5.67" 6.50" 6.50" 6.50" 6.50" 6.50" 9.00" 9.00" 9.00" 9.00" 1.19" 1.19" 1.19" 1.50" 1.50" 1.50" 2.00" 2.00" 2.00" 2.63" 2.63" 2.63" 3.44" 3.44"

G3S-138 G3S-150 G3S-163 G3S-175 G3S-213 G3S-263 G3S-275 G3S-288 G3S-313 G3S-338 G3S-363 G3S-369 G3S-375 G3S-388 G3S-400 G3S-438 G3S-463 G3S-475 G3S-483 G3S-494 G3S-650 G3S-675 G3S-688 G3S-700 G3S-713 G3S-850 G3S-900 G3S-1075 G3S-1100 G3S-1125 G3S-1300 G3S-1325 G3S-1350 G3S-1375 G3S-138S G3S-163S G3S-175S G3S-188S G3S-200S G3S-213S G3S-263S G3S-275S G3S-363S G3S-375S G3S-388S G3S-463S G3S-475S G3S-483S

1" 1" 1" 2" 2" 2" 3" 3" 3" 3" 3" 4" 4" 4" 4" 4" 6" 6" 6" 6" 6" 8" 8"

1 1 ⁄ 2 "

3 ⁄ 4 "

2 3 ⁄ 8 " 2 3 ⁄ 4 " 3 1 ⁄ 2 " 3 1 ⁄ 2 "

2 1 ⁄ 8 " 2 3 ⁄ 4 "

1 3 ⁄ 8 " 1 1 ⁄ 2 " 1 1 ⁄ 2 " 1 3 ⁄ 4 "

1 1 ⁄ 8 " 2 1 ⁄ 4 " 2 1 ⁄ 4 " 2 1 ⁄ 2 " 2 3 ⁄ 4 " 3 1 ⁄ 4 " 4 1 ⁄ 4 " 4 3 ⁄ 4 " 5 7 ⁄ 8 " 4"

1"

2 1 ⁄ 2 " 2 1 ⁄ 2 "

1 1 ⁄ 4 " 1 1 ⁄ 2 "

2"

4"

2 1 ⁄

8 "

2 1 ⁄ 2 "

2 3 ⁄ 4 "

3" 4" 5" 6"

3"

3 1 ⁄ 8 " 4 5 ⁄ 8 " 5 1 ⁄ 8 "

Steel hose ferrules are used with barbed hose fittings and are crimped on large-diameter hydraulic hose presses to create a strong, permanent and tamper-resistant hose connection. Sleeves will work with most barbed inserts, while G3F ferrules are designed to interlock with particular hose stems, such as our G65C and G65E cam-locks and our G33 crimp style combination nipples. The Sleeve I.D. measurement below refers to the inside diameter of the ferrule before crimping. Length G3F… PLATED STEEL INTERLOCKING FERRULE G3F-150 1" 1.50" 2.29" G3F-163 1" 1.63" 2.29" G3F-206 1 1 ⁄ 2 " 2.06" 2.36" G3F-213 1 1 ⁄ 2 " 2.13" 2.36" G3F-263 2" 2.63" 2.79" G3F-275 2" 2.75" 2.79" G3F-363 3" 3.63" 3.94" G3F-375 3" 3.75" 3.94" G3F-388 3" 3.88" 3.94" G3F-463 4" 4.63" 4.19" G3F-475 4" 4.75" 4.19" G3F-481 4" 4.81" 4.19" G3F-494 4" 4.94" 4.19" G3F-663 6" 6.63" 5.67" G3F-688 6" 6.88" 5.67" G3F-713 6" 7.13" 5.67" G3SSF… TYPE 304 STAINLESS STEEL INTERLOCKING FERRULE G3SSF-206 1 1 ⁄ 2 " 2.06" 2.36" G3SSF-213 1 1 ⁄ 2 " 2.13" 2.36" G3SSF-225 1 1 ⁄ 2 " 2.25" 2.36" G3SSF-263 2" 2.63" 2.79" G3SSF-275 2" 2.75" 2.79" G3SSF-363 3" 3.63" 3.94" G3SSF-375 3" 3.75" 3.94" G3SSF-463 4" 4.63" 4.19" G3SSF-481 4" 4.81" 4.19" Nominal Sleeve Sleeve Part No. Hose Size I.D.

10" 10" 10" 12" 12" 12" 12"

10.75" 11.00" 11.25" 13.00" 13.25" 13.50" 13.75"

Short Sleeves G3S-113S

3 ⁄ 4 "

1.13" 1.38" 1.63" 1.75" 1.88" 2.00" 2.13" 2.63" 2.75" 3.63" 3.75" 3.88" 4.63" 4.75" 4.83"

1" 1"

1 1 ⁄ 4 " 1 1 ⁄ 4 " 1 1 ⁄ 2 "

2" 2" 2" 3" 3" 3" 4" 4" 4"

11

Clamps & Ferrules

3.44" G3SS… TYPE 304 STAINLESS STEEL SLEEVE Long Sleeves G3SS-125 3 ⁄ 4 " 1.25" 2.13" G3SS-138 1" 1.38" 2.13" G3SS-150 1" 1.50" 2.31" G3SS-163 1" 1.63" 2.31" G3SS-175 1" 1.75" 2.31" G3SS-188 1 1 ⁄ 4 " 1.88" 2.38" G3SS-213 1 1 ⁄ 2 " 2.13" 2.38" G3SS-225 1 1 ⁄ 2 " 2.25" 2.36" G3SS-263 2" 2.63" 2.75" G3SS-275 2" 2.75" 2.75" G3SS-313 2 1 ⁄ 2 " 3.13" 3.13" G3SS-369 3" 3.69" 3.94" G3SS-375 3" 3.75" 3.94" G3SS-388 3" 3.88" 3.94" G3SS-483 4" 4.83" 4.19" G3SS-494 4" 4.94" 4.19" Short Sleeves G3SS-150S 1" 1.50" 1.25"

113