11thPulsarCatalog

O-RING KITS & SLEEVES

These replacement o-rings are made from buna-n nitrile rubber and are resistant to gasoline, oil, grease and petroleum base hydraulic fluids. Other o-ring materials can be special ordered. 0011KIT… ORB BOSS O-RING KIT

TPG… PLASTIC STRAIN RELIEVERS Strain relievers are an important tool in protecting hose assemblies from early failure due to excessive pulling or bending near the coupling. These tapered black plastic strain relief guards are particularly popular and essential for hot water pressure wash assemblies due to the harshness of the application and are strongly recommended to help prevent premature hose failure.

Part Number

Description

TPG-530 TPG-625 TPG-725 TPG-815 TPG-1000

0.053" I.D. black tapered guard 0.625" I.D. black tapered guard 0.725" I.D. black tapered guard 0.815" I.D. black tapered guard 1.000" I.D. black tapered guard

Part Number

Description

0011-KIT ORB O-Ring Kit Contains 212 assorted 90 durometer o-rings for o-ring boss connections in sizes -02 to -32 00093KIT… O-RING FACE SEAL KIT

NAS… NYLON ABRASION SLEEVE Extreme high pressure fluid leaks can cause injuries where a stream of fluid penetrates the skin. High pressure hydraulic hoses that operate in proximity to workers must be covered by a protective sleeve. The sleeve is installed over the entire assembly length and fixed over the crimp ferrule at both ends with ferrules or strap clamps.

Sleeve I.D.

NAS-082 NAS-100 NAS-113 NAS-125 NAS-158 NAS-178 NAS-191 NAS-206 NAS-218 NAS-238 NAS-254 NAS-293 NAS-334 NAS-365 NAS-440

0.82" 1.00" 1.13" 1.25" 1.58" 1.78" 1.91" 2.06" 2.18" 2.38" 2.54" 2.93" 3.34" 3.65"

00093-KIT O-Ring Face Seal Kit Contains 155 assorted 90 durometer o-rings for o-ring face seal connections in sizes -04 to -24 G11KIT… INDUSTRIAL O-RING KIT G11KIT O-Ring Kits contain 380 assorted o-rings in 30 different sizes. 4-PACK contains 216 hydraulic o-rings in 27 sizes to cover most ORB, ORFS, and split flange fittings and adapters. Each box has a label identifying the application and dash sizes of the seals. Complete with a handy carrying case.

4.40" NASV… NYLON ABRASION SLEEVE WITH VELCRO CLOSURE For fast and easy installation, and simple retrofits NASV-238 2.38" NASV-275 2.75" NASV-300 3.00" NASV-500 5.00" NASV-700 7.00"

G11KIT-N70 G11KIT-N90

70 Durometer – Industrial/Automotive

90 Durometer – Hydraulic G11KIT-N70M 70 Durometer - Metric Industrial/Automotive

Accessories

G11KIT-4PACK O-Ring Replacement Kit 4-Pack

155

pulsarhydraulics.com