11thEditionPulsarCatalog
COMPACT & ULTRA WIRE BRAID HYDRAULIC HOSE 110CC… CARBONITE 17 – EXCEEDS SAE 100R17 – MSHA HARC COVER
Hose
Tube : Seamless oil resistant nitrile rubber. Reinforcement : One high tensile steel wire braid. Cover : Smooth, high abrasion, oil, and weather resistant black syn thetic rubber. MSHA approved. Temperature Range : -40°C (-40°F) to 100°C (212°F), petroleum base fluids intermittent to 125°C (257°F).
CARBONITE 17 hydraulic hose features a smooth HARC cover allowing wear resistance up to 10 times that of conventional rubber hoses and offering improved resistance to weather without sacrificing flexibility. This hose is ideally suited for medium pressure hydraulic lines where higher environmental abrasion resistance and a tighter bend radius is required, such as forklift masts, extending booms, and other over-the sheave applications. CARBONITE 17 exceeds SAE 100R17 specifications and has a MSHA approved cover for flame resistance in underground mining applications.
Part
Hose
Hose O.D.
Working Pressure 3250 psi
Min. Burst Pressure 13000 psi
Min. Bend
Weight
Number
I.D. 1 ⁄ 4 "
Radius
per ft
Recommended Coupling Series
110CC-04 110CC-06 110CC-08
0.48"
1.5"
0.13 lb
4200 4200 4200
4300 4300 4300
5000 5000 5000
3 ⁄ 8 1 ⁄ 2
0.63 0.75
3250 3250
13000 13000
2.0 2.8
0.19 0.26
114CC… CARBONITE 16 – EXCEEDS SAE 100R16 & SAE 100R17 – MSHA HARC COVER
CARBONITE 16 hydraulic hose features a HARC cover allowing wear resistance up to 10 times that of conventional rubber hoses and of fering improved resistance to weather without sacrificing flexibility. With higher working pressures and half the bend radius of SAE 100R2 hydraulic hose, 114CC can be used for a wide range of hydraulic ap plications where abrasion rubbing or sliding is a concern. CARBONITE 16 exceeds SAE 100R16 as well as SAE 100R17 specifications in sizes up to 1" and has a MSHA approved cover.
Tube : Seamless oil resistant nitrile rubber. Reinforcement : Two high tensile steel wire braids.
Cover : High abrasion, oil, and weather resistant black synthetic rub ber. Smooth cover in sizes up to 1". Wrapped cover in sizes over 1". MSHA approved. Temperature Range : -40°C (-40°F) to 100°C (212°F), petroleum base fluids intermittent to 125°C (257°F).
Part
Hose
Hose O.D.
Working Pressure 6500 psi
Min. Burst Pressure 26000 psi
Min. Bend
Weight
Number
I.D. 1 ⁄ 4 "
Radius
per ft
Recommended Coupling Series
114CC-04 114CC-06 114CC-08 114CC-10 114CC-12 114CC-16 114CC-20 114CC-24
0.52"
2.0"
0.17 lb
4200 4200 4200 4200 4200 4200
4300 4300 4300
5000 5000 5000 5000 5000 5000 5000 5000
3 ⁄ 8 1 ⁄ 2 5 ⁄ 8 3 ⁄ 4
0.65 0.79 0.94 1.09 1.38 1.72 1.98
5400 4500 4000 3500 3000 2400 2000
21600 18000 16000 14000 12000
2.6 3.5 3.9 4.7 5.9 8.3 9.8
0.27 0.34 0.44 0.54 0.77 1.14 1.31
1
1 1 ⁄ 4 1 1 ⁄ 2
9600 8000
114… NOVA 16 – EXCEEDS SAE 100R16 & SAE 100R17 – MSHA COVER
Higher working pressures plus a very small bend radius are possible due to the high tensile steel used for the two wire braids. With a MSHA approved cover, NOVA 16 gives you a hose that can be used for a wide range of applications including the conveyance of mineral oils, vegetable oils, water, air, and inert gases. NOVA 16 exceeds SAE 100R16 and SAE 100R17 specifications.
Tube : Seamless oil resistant nitrile rubber. Reinforcement : Two high tensile steel wire braids. Cover : Oil, abrasion, and weather resistant black synthetic rubber. MSHA approved. Temperature Range : -40°C (-40°F) to 100°C (212°F), petroleum base fluids intermittent to 125°C (257°F).
Part
Hose
Hose O.D.
Working Pressure 6500 psi
Min. Burst Pressure 26000 psi
Min. Bend
Weight
Number 114-04 114-06 114-08 114-10 114-12 114-16
I.D. 1 ⁄ 4 "
Radius
per ft
Recommended Coupling Series
0.52"
2.0"
0.20 lb
4200 4200 4200 4200 4200 4200
4300 4300 4300
5000 5000 5000 5000 5000 5000
3 ⁄ 8 1 ⁄ 2 5 ⁄ 8 3 ⁄ 4
0.65 0.79 0.94 1.09 1.38
5400 4500 4000 3500 3050
21600 18000 16000 14000 12200
2.8 3.5 3.5 4.7 5.9
0.26 0.37 0.40 0.54 0.74
1
6
Made with FlippingBook - professional solution for displaying marketing and sales documents online