11thEditionPulsarCatalog

8600 SERIES CRIMP COUPLINGS

Interlock fittings are so-named because the wire reinforcement of the hose is mechanically locked between the ferrule and the insert. This is accomplished by skiving the cover and the end section of the tube, so that during the crimping process, the bare wire reinforcement is locked over a specially designed shoulder on the fitting. Interlock fittings are required for very high pressures and tough impulse applications. Interlock flange fittings are machined from bar stock and then bent and heat treated. Fittings made in this way are stronger than conventional brazed fittings assembled from component parts. Note: Special care must be taken when assembling these critical hoses. Always consult an up-to-date crimp chart to determine the correct ferrule, skive and crimp specifications for your hose assembly.

8605… JIC 37° FEMALE SWIVEL

Crimp

Couplings

Part Number Thread Size Hose I.D. 8605-12-12 1 1 ⁄ 16 -12 3 ⁄ 4 " 8605-16-16 1 5 ⁄ 16 -12 1" 8605-20-20 1 5 ⁄ 8 -12 1 1 ⁄ 4 " 8605-24-24 1 7 ⁄ 8 -12 1 1 ⁄ 2 " 8605-32-32 2 1 ⁄ 2 -12 2"

8645… JIC 37° FEMALE - 45° ELBOW

8640… FOUR SPIRAL INTERLOCK FERRULE

Part Number Thread Size Hose I.D.

Drop Length

Part Number

Hose I.D.

8645-12-12 1 1 ⁄ 16 -12 8645-16-16 1 5 ⁄ 16 -12

3 ⁄ 4 "

1.02" 1.22"

8640-12 8640-16 8640-20 8640-24 8640-32

3 ⁄ 4 "

1"

1"

1 1 ⁄ 4 " 1 1 ⁄ 2 "

8695… JIC 37° FEMALE - 90° ELBOW

2"

8660… SIX SPIRAL INTERLOCK FERRULE

Part Number Thread Size Hose I.D.

Drop Length

8695-16-16 1 5 ⁄ 16 -12 8695-20-20 1 5 ⁄ 8 -12

1"

2.80" 3.03"

1 1 ⁄ 4 "

Part Number

Hose I.D.

8660-20 8660-24 8660-32

1 1 ⁄ 4 " 1 1 ⁄ 2 "

86083… ORFS FEMALE

2"

8616… NPTF MALE

Part Number Thread Size Hose I.D. 86083-12-12 1 3 ⁄ 16 -12 3 ⁄ 4 " 86083-16-16 1 7 ⁄ 16 -12 1" 86083-20-16 1 11 ⁄ 16 -12 1" 86083-20-20 1 11 ⁄ 16 -12 1 1 ⁄ 4 "

Part Number 8616-16-16 8616-20-20 8616-24-24 8616-32-32

Thread Size 1-11 1 ⁄ 2 1 1 ⁄ 4 -11 1 ⁄ 2 1 1 ⁄ 2 -11 1 ⁄ 2 2-11 1 ⁄ 2

Hose I.D.

1"

1 1 ⁄ 4 " 1 1 ⁄ 2"

2"

56