11thEditionPulsarCatalog

HYDRAULIC HOSE ASSEMBLIES

Hose

157CD... COMPRESSOR DISCHARGE HOSE ASSEMBLIES

Tube : Extruded PTFE. Reinforcement : One high tensile Type 304 stainless steel wire braid. Temperature Range : -54°C (-65°F) to 232°C (450°F). Fittings : Permanently attached brass SAE 45° female swivel ends.

Featuring brass female swivel ends and a stainless steel wire braid cover, our Compressor Discharge assemblies are designed to withstand temperatures up to 232°C (450°F) and can be used in a variety of applications where corrosion is a concern including air compressor, hydraulic, or gas applications.

Hose

Thread

Part

Weight

I.D. 1 ⁄ 2 "

Size

Length

Number

Each

Please note : The minimum bend radius on these assemblies is 6.5". Exceeding the minimum bend radius will result in kinking of the tube and premature failure.

7 ⁄ 8 -14

24"

157-10SAE24 157-10SAE36 157-10SAE48 157-10SAE60

1.67 lb

36 48 60

3.53 4.41 7.25

116... RECORDER HOSE Recorder hose is used to record data during well fracturing operations. The low volumetric expansion of Recorder Hose coupled with its ex tremely high working pressure and tough polyurethane cover make it the ideal hose for this application.

Tube : Polyester elastomer. Reinforcement : Two spiral braids of aramid fibre and one high tensile steel wire braid. Cover : Black polyurethane. Temperature Range : -40°C (-40°F) to 100°C (212°F). Fittings : Factory installed special recorder hose fittings. All recorder hose assemblies are tested to 1 1 ⁄ 2 times working pressure before leaving our facilities and are fitted with special male NPTF threaded fittings. Assemblies are built by request.

Part

Hose

Hose O.D.

Working Pressure

Min. Burst Pressure

Min. Bend

Weight

Number I.D.

Radius

per ft

Recommended Coupling Series

116-04

1 ⁄ 4 "

0.50" 16400 psi 40000 psi

1.38"

0.12 lb

8700

19

pulsarhydraulics.com