11thEditionPulsarCatalog
F L ANG E D I ME N S I ON S
Port Size
Working Pressure
Flange
Flange
Bolt Hole Spacing
Bolt Size
Bolt
O.D.
Thickness
Torque (in-lb)
Code 61 Flange -08
1 ⁄ 2 "
5000 psi
1.19" 1.50 1.75 2.00
0.265" 0.265 0.315 0.315 0.315 0.375 0.375 0.375 0.442 0.305 0.345 0.375 0.405 0.495 0.495
1.50" 1.88 2.06 2.31
5 ⁄ 16 -18 x 1 1 ⁄ 4 3 ⁄ 8 -16 x 1 1 ⁄ 4 3 ⁄ 8 -16 x 1 1 ⁄ 4 7 ⁄ 16 -14 x 1 1 ⁄ 2 1 ⁄ 2 -13 x 1 1 ⁄ 2 1 ⁄ 2 -13 x 1 1 ⁄ 2 1 ⁄ 2 -13 x 1 3 ⁄ 4 5 ⁄ 8 -11 x 1 3 ⁄ 4 5 ⁄ 8 -11 x 2 5 ⁄ 16 -18 x 1 1 ⁄ 4 3 ⁄ 8 -16 x 1 1 ⁄ 2 7 ⁄ 16 -14 x 1 3 ⁄ 4 1 ⁄ 2 -13 x 1 3 ⁄ 4 5 ⁄ 8 -11 x 2 1 ⁄ 4 3 ⁄ 4 -10 x 2 3 ⁄ 4
175-225 250-350 325-425 425-550
-12 -16 -20 -24 -32 -40 -48 -64 -12 -16 -20 -24 -32
3 ⁄ 4
5000 5000 4000 3000 3000 2500 2000 6000 6000 6000 6000 6000 6000 500
1
1 1 ⁄ 4
1 1 ⁄ 2
2.38 2.81 3.31 4.00 5.00 1.25 1.63 1.88 2.13 2.50 3.13
2.75 3.06 3.50 4.19 5.13 1.59 2.00 2.25 2.62 3.12 3.81
550-700 650-800 950-1100 1650-1800 1400-1600
2
2 1 ⁄ 2
3 4
Code 62 Flange -08
1 ⁄ 2 3 ⁄ 4
175-225 300-400 500-600
1
1 1 ⁄ 4 1 1 ⁄ 2
750-900
1400-1600 2400-2600
2
Komatsu Flange -10
5 ⁄ 8
5000
1.34
0.265
Metric
Cat Flange -12
3 ⁄ 4
6000 6000 6000
1.62 1.88 2.13
0.560 0.560 0.560
2.00 2.25 2.62
3 ⁄ 8 -16 x 1 1 ⁄ 2 7 ⁄ 16 -14 x 1 3 ⁄ 4 1 ⁄ 2 -13 x 1 3 ⁄ 4
300-400 500-600 750-900
-16 -20
1
1 1 ⁄ 4
T H R E AD I N S TA L L AT I ON T ORQU E S P E C I F I C AT I ON S
Torque in ft.lb. for:
Dash
BSPP
JIC 37°
ORFS
ORB NPTF dry* BSPP
BSPT JIS 30°
Conversion Adapters
Min Max Min Max Max Min Max
Size
Min Max Min Max Min Max
Max
-02 -04 -05 -06 -08 -10 -12 -16 -20 -24 -32
20 25
15
12 25
13 15 23 27
11 12 14 15 18 20 36 39 57 63 79 88
10 12
14 16 18 20 24 26 50 60 72 80
26 30
11 13
18 20 32 35 46 50
35 45
52 59 66 85
19 28 30 36 37 44
40 54
33 37 48 52 55 59 70 80
65 70 125 135
55 65 80 95
133 140 50 60
78
108 113 92 100 200 220 127 133 125 140 210 280 158 167 150 165 270 360
221 229 79 95 112 117 125 243 332 127 152 154 162 173
295 398 167 190 211
245 258
120
262 314
■ ■ *If thread sealant is used, maximum values should be decreased by 25%. ■ ■ For male tapered threads coupled to NPSM parallel threads, maximum values should be decreased by 50%. ■ ■ Use only enough torque to achieve a seal, since NPTF sealing torques vary greatly.
Tech Info
179
pulsarhydraulics.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online