11thEditionPulsarCatalog

THREAD-TO-CONNECT TEST POINT COUPLINGS

Diagnostic test couplings are used to monitor pressures in hydraulic systems and can also be used to vent hydraulic systems and draw fluid samples for contamination measurement. Galvanized carbon steel construction with Buna-N (Nitrile) seals allow for working temperatures up to 125°C (257°F) for all hydraulic and mineral oils. Rated to 9100 psi, these couplers feature an M16 X 2.0 thread-to-connect body and are interchangeable with Stauff Test 20, Parker EMA3, Cejn Press-Check, Voss Point Measuring, and Tompkins Test Point designs. Temperature Range : -30°C (-22°F) to 125°C (257°F). Interchange : Stauff Test 20, Parker EMA3, Cejn Press-Check, Voss Point Measuring, Tompkins Test Point.

Part Number Thread Size T16… COUPLER WITH NPT THREAD

Part Number Thread Size TG08… DIRECT GAUGE COUPLER

TG08-04

1 ⁄ 4 -18

T16-02 T16-04

1 ⁄ 8 -27 1 ⁄ 4 -18

TG08BH… UNVALVED HOSE BULKHEAD GAUGE ADAPTER

T11… COUPLER WITH O-RING BOSS THREAD

TG08BH-04

1 ⁄ 4 -18

T11-02 T11-04 T11-06

5 ⁄ 16 -24 7 ⁄ 16 -20 9 ⁄ 16 -18

T36… COUPLER WITH BSPP THREAD

T36-02 T36-04 T36-06

1 ⁄ 8 -28 1 ⁄ 4 -19 3 ⁄ 8 -19

T00… UNVALVED HOSE CONNECTOR

T00

T38… COUPLER WITH BSPT THREAD

T38-02 T38-04

1 ⁄ 8 -28 1 ⁄ 4 -19

T00BH… COUPLER WITH BULKHEAD HOSE ADAPTER

T00BH

Diagnostics

T72… COUPLER WITH METRIC DIN PORT THREAD

T72-08 T72-10

M8 x 1.0 M10 x 1.0 M10 x 1.50* M12 x 1.5 M14 x 1.5 M16 x 1.5

T72-10X1.50

T72-12 T72-14 T72-16

*Denotes non-standard

147

pulsarhydraulics.com