11thEditionPulsarCatalog

OEM SPECIFIC HYDRAULIC HOSE

109CC… OEM 17 – SAE 100R17 – HARC COVER OEM 17 is designed specifically for Original Equipment Manufacturers. The wrapped HARC cover allows wear resistance up to 10 times that of conventional rubber hoses allowing OEM 17 to stand up against high abrasion environments. Ideally suited for medium pressure hydraulic lines where a tighter bend radius may be required, this hose meets the working pressure requirements set out by SAE 100R17. Engineers can specify the need for SAE 100R17 hose and know that OEM 17 will operate at 3000 psi regardless of diameter.

Hose

Tube : Seamless oil resistant nitrile rubber. Reinforcement : One high tensile steel wire braid. Cover : High abrasion, oil, and weather resistant wrapped black syn thetic rubber. Temperature Range : -40°C (-40°F) to 100°C (212°F), petroleum base fluids intermittent to 125°C (257°F).

Part

Hose

Hose O.D.

Working Pressure 3000 psi

Min. Burst Pressure 12000 psi

Min. Bend Weight

Number

I.D.

Radius

per ft

Recommended Coupling Series

109CC-04 109CC-06 109CC-08

0.48” 0.62 0.76

2.0”

0.11 lb

4200 4200 4200

4300 4300 4300

5000 5000 5000

1/4"

3000 3000

12000 12000

2.5 3.5

0.18 0.26

3/8 1/2

112CC… OEM 16 – SAE 100R16 – HARC COVER OEM 16 features a wrapped HARC cover which allows wear resistance up to 10 times that of conventional rubber hoses while at the same time offering higher working pressures and half the bend radius of traditional SAE 100R2 hydraulic hose. With the benefits of SAE 100R1 dimensions, OEM 16 has become a popular choice of original equipment manufacturers since it is lighter in weight and easier to route in tight spaces than conventional hoses.

Tube : Seamless oil resistant nitrile rubber. Reinforcement : Two high tensile steel wire braids. Cover : High abrasion, oil, and weather resistant wrapped black syn thetic rubber. Temperature Range : -40°C (-40°F) to 100°C (212°F), petroleum base fluids intermittent to 125°C (257°F).

Part

Hose

Hose O.D. 0.52” 0.67 0.81 0.96 1.09 1.38

Working Pressure 5800 psi

Min. Burst Pressure 23200 psi

Min. Bend Weight

Number 112CC-04 112CC-06 112CC-08 112CC-10 112CC-12

I.D. 1 ⁄ 4 "

Radius

per ft 0.17 lb

Recommended Coupling Series 4200 4300 5000 4200 4300 5000 4200 4300 5000

2.0”

3 ⁄ 8 1 ⁄ 2 5 ⁄ 8 3 ⁄ 4

4800 4000 3600 3100 3000

19200 16000 14400 12400 12000

2.5 3.5 3.9 4.7 5.8

0.27 0.34 0.44 0.50 0.77

4200 4200 4200

5000 5000 5000

112CC-16 1

122A... OEM 2 - SAE 100R2AT

Commonly found in agricultural applications, OEM 2 is the ideal SAE 100R2 hose for original equipment manufacturers who do not require MSHA flame resistance. This traditional double wire hose is not as susceptible as compact hoses to extended exposure to ozone and weathering as well as abrasion where a thinner cover may result in reduced hose life.

Tube : Seamless oil resistant nitrile rubber. Reinforcement : Two high tensile steel wire braids.

Cover : Abrasion, oil, and weather resistant black synthetic rubber. Temperature Range : -40°C (-40°F) to 100°C (212°F), petroleum base fluids intermittent to 125°C (257°F).

Part

Hose

Hose O.D. 0.56” 0.72 0.84 1.13

Working Pressure 5800 psi

Min. Burst Pressure 23200 psi

Min. Bend Weight

Number 122A-04 122A-06 122A-08 122A-12

I.D. 1 ⁄ 4 "

Radius

per ft

Recommended Coupl ing Ser ies

3.9”

0.24 lb 3000 4200 4300

5000

3 ⁄ 8 1 ⁄ 2 3 ⁄ 4

4800 4000 3100

19200 16000 12400

4.9 7.0 9.5

0.34 0.40 0.58

3000 4200 4300 4400 5000 3000 4200 4300 4400 5000

3000 4200

4400 5000

12